M4wdriveway Yota Exo

[etk300ex]

awww man, I just noticed these bastards dont send the $3 fittings you need to tap the steering box with the hydro assist kit 

is there anywhere local to get a 1/4" pipe to #6 JIC fitting?

[Ryan]

TSC should have them.

[M4wdFab]

http://www.lowrangeoffroad.com/index.php/1-4-pipe-to-6-jic-fitting-for-hydro-assist-tapping.html


you need stainless or brass?

[etk300ex]

Brass

[M4wdFab]

i think i have you covered,  #6 is 3/8?   or 6/16"s?

[etk300ex]

Either

[etk300ex]

You got any e-fans laying around smike?  Mine stocker is hosed, you can wiggle it like 2 inches lol.


I think may have fucked up on my hydro assist ram, I pulled the trigger on the 2"x6" ram on the last day of A 25% off sale, but after doing some research the 1.5"x6" is designed for the stock pump and the 2" is for the upgraded pump.  So I either exchange it at $30 shipping each way or order the upgraded pump for $150 or give it a whirl and order it later if it blows and do the work twice 

[M4wdFab]

should have just bought my full hydro setup when i got full PSC 


i would think a 2" would just be slower and easier on the pump / box

[mr.mindless]

since it's assist it should kinda match the box and ram, they might fight each other.  I bet there's a restricted oriface somewhere that you can drill out for more flow.

[M4wdFab]

i have a couple fans i believe.

[etk300ex]

should have just bought my full hydro setup when i got full PSC 

I've asked you numerous  times when is this going down!

[M4wdFab]

2500$ you can every thing between the link bolts and the wheel studs

[etk300ex]

I want a ram and an orbital and some hoses

[M4wdFab]

these are all things that can be purchased off the shelf

[etk300ex]

I got $200 into the assist.  I figured minimum $500 for full hydro