The Profender 4-seater

[Ryan]

Worked on the spare tire last night, got the beadlock done tire mounted, just need to stop at Fastenal for the bolts.

Its a heavy ass tire to get up on the back of the buggy. 

[etk300ex]

You get another irok?

[M4wdFab]

you gota do the roll trick on one of the other rear tires.  i had one of my krts up there to check for new shock location clearance

[Ryan]

Yes a new Irok.

I rolled it up the rear tire. It's still 150 pounds or so.

[jacel86]

Should be able to stack those 12 high! I can do 10 and I'm a relative midget

[Callelle]

This is why I say everyone should hire me as a personal lifter.

[M4wdFab]

transportation costs are too high   

[M4wdFab]

i was thinking about this hog and since your having a new shaft built for the front, and your front and rear shafts are the same, why not take the hosed slip yoke and make a square shaft to carry as a spare with two new joints, and full sets of ubolts.  you would just need the square and one more 1410 something end.  i think it would be a great idea. 

[Ryan]

No new shaft needed, just a yoke end and clean up the splines.

I should get another superduty shaft and carry it as a spare.

Im so frustrated with this pile, Its gonna get torn apart tonight and all parts will be looked at closely, Im tired of breaking. Emails in to various places for replacement parts. Grrrrrr

[Ryan]

And the Dodge is making a really bad noise, sounds like PS pump or Ideler pulley, leaking something out the front as well. Grrrrr

[M4wdFab]

it was making noise when you moved your trailer, i forgot about that lol

i can maybe come over and help with the buggy tonight.  you are welcome to bring it here also.  I will be ordering parts, and more preping next week after 101.  i fixed everything i needed to for 101 last night.

[M4wdFab]

what trans cooler you have on this guy?  i am not finding anything that looks good regardless of cost right now.  cant think of the name of the one lucas said to get. 

[Ryan]

I believe this is the one I have

http://www.summitracing.com/parts/DER-15800/

List of them all

http://www.summitracing.com/search/Part-Type/Fluid-Coolers-with-Fan/

[Ryan]

If you or anyone wants to come over, I will be working on this beast tonight.

[mr.mindless]

I would but I don't want to share my sickness.

I was talking with Gif last night about the rear yoke, how was yours converted for ubolts? If it was a DIY, were the tips all brought back far enough to get clean ubolt clamping and the back sides flattened out for good flat but seating? Ubolts really shouldn't ever break that way.