Moose

[Ryan]

Troys orbital works perfectly, 3 turns lock to lock.

Checked the part number on the one I took out, its 160cc. $225 if anyone here wants it.

[luvmyxj]

Awesome,glad it worked out.idk if you used the fittings on it but I forgot to tell you that black one I beleive is a check valve if that matters at all

[Ryan]

Hmm, I did use them, I should check that out.

[Ryan]

Took this thing out for a test run at our land today. Changing the valving in the shock helped a ton, its smooth and floats along the bumps. It rides awesome. Topped out at 35mph full pedal to the floor. OD id not active so thats just 3rd gear.

Steering is good, cooling is good, brakes work good can lock up all 4 in the field. Still gets a little warm in the cab, but thats life in a buggy.

Flexed it out and it does not hit the tires anymore on the chassis.

She is ready for the weekend.

 

[Ryan]

Motorhome needs a water heater replaced, have the new water heater, just need some fittings and it should be good. 2-hour job, I hope.

[gif]

She is ready for the weekend.

Bring it to RC 13-15 !

[Ryan]

Possible.

[Ryan]

Fixed and ready for another fine adventure.

[etk300ex]

new end slide in?

[Ryan]

Spline adjustment is all that was needed. 

It slips like it should now, no more problems. :fingerscrossed:

[Ryan]

I need to limit that side a little, there are marks on the flanges, adding an internal spacer seems like the best solution.

[mr.mindless]

Some burrs or deformation we couldn't see when it was greasy?

[Ryan]

Some burrs or deformation we couldn't see when it was greasy?

Yes. Exactly.

[M4wdFab]

I need to limit that side a little, there are marks on the flanges, adding an internal spacer seems like the best solution.

too bad no one told you that

[gif]

Fixed and ready for another fine adventure.

fixed what?