2hr mowing and mowzer is out of gas. Lawn nearly done with gang mower setup on it.
Mowzer is working hard to not be pushed around by the gang mower. But absolutely does cut time in half if I have to cut with it, compared to almost no time savings going slower with the Jacobsen.
Got some 37* JIC plugs and caps yesterday and plugged up the motor. I suspect the motor is bad, it’s stiff to turn one way and not too difficult to turn the other way using the 8” pulley. So probably will throw a motor at it, and depending how much that hurt$, maybe still get the hydraulic tester and set the relief valve to spec or a smidge tighter and maybe get it cutting much better. I hope?