Post by: etk300ex on June 26, 2020, 01:03:34 PM
-3/4 or 1 ton SRW
-Gas
-4x4, manual hubs & t-case preferred
-Crew cab, would consider regular 4-door
-Flatbed preferred, minimum 8' box
-No rust
-150kish miles
-I'd like to spend $7-8k, would go up to 10 for the right unit
Post by: etk300ex on June 26, 2020, 01:13:47 PM
Sent from my iPhone using Tapatalk
Post by: mr.mindless on June 26, 2020, 01:39:17 PM
my 2007 Ram just now is starting to look like a NY truck with rust on things in places.
Post by: mr.mindless on June 26, 2020, 01:41:02 PM
highway department or milatary retiree is where most of those SRW 8' crew cabs seem to come from. base trim level double bench seat sweetness.
Post by: mr.mindless on June 26, 2020, 01:44:33 PM
https://www.facebook.com/marketplace/item/583689088953832/
Post by: mr.mindless on June 26, 2020, 01:48:30 PM
https://www.facebook.com/marketplace/item/719294328598038/
almost seems hard to find in non-diesel.
I drove a 7.3 IDI 5 speed for a year or so, 2005-2006 I think? When I lived with Keith. Traded it in for my first TDI Jetta. It was a king cab long bed 4x2 and I think it was a 16-18mpg truck. Wouldn't win any races. never towed or hauled with it, but it was a really nice driver.
Post by: mr.mindless on June 26, 2020, 01:49:16 PM
Post by: M on June 26, 2020, 01:56:27 PM
IFS lives on shitty dirt roads.
Post by: etk300ex on June 26, 2020, 01:57:42 PM
Post by: etk300ex on June 26, 2020, 02:01:17 PM
Sounds like you want a straight axle so GM's out, right?
IFS lives on shitty dirt roads.
IFS is fine.
Post by: etk300ex on June 26, 2020, 02:03:36 PM
https://www.countrytruckandcar.com/details/used-2004-dodge-ram-pickup-2500/66380445
Post by: etk300ex on June 26, 2020, 02:05:33 PM
Post by: etk300ex on June 26, 2020, 02:06:44 PM
https://www.facebook.com/marketplace/item/192763015234112/
That would be sweet on a van chassis if it was 5k cheaper haha
Post by: M on June 26, 2020, 02:17:18 PM
I've been eying this one up right here in Canandaigua. I though the price was nuts, but local buy might be worth it. https://www.facebook.com/marketplace/item/466480264259622/
I really like the bumpers on that a lot. Very clean.
Price isnt nuts. It's what I am seeing down here too. They arent cheap trucks.
Post by: mr.mindless on June 26, 2020, 02:44:31 PM
Post by: M4wdFab on June 26, 2020, 03:34:48 PM
Post by: TrailTamer on June 26, 2020, 05:14:44 PM
drop them off with a $5k check at M4wd fabrication shop. Come back in couple of weeks.... win?
Post by: mr.mindless on June 26, 2020, 05:23:03 PM
Ignoring crash safety. Which for this should maybe be a consideration.
Post by: M4wdFab on June 26, 2020, 06:17:55 PM
Post by: mr.mindless on June 26, 2020, 07:03:01 PM
both need a lot of attention to be severe family duty reliable.
Post by: Wingman on June 26, 2020, 07:20:33 PM
Post by: M on June 26, 2020, 08:33:16 PM
https://www.ebay.com/itm/164225656655
One problem... opposite coast of USA.
Post by: KingtheZJ on June 26, 2020, 08:37:39 PM
Other one was 2003 ext can short box 6.0.
The 6.0 eats and was my favorite. Both were 4x4 push button and I liked that.
There is no way I would go diesel again unless I’m hawgin a monster trailer.
Post by: Wingman on June 26, 2020, 08:41:56 PM
There is no way I would go diesel again unless I’m hawgin a monster trailer.
Agreed. Diesel is great for towing but a 6.0 gasser is an awesome all-around unit.
Post by: Callelle on June 27, 2020, 07:43:22 PM
Ehhhhhhhh. After taking my Duramax to rausch this weekend, I don't think I'd ever go back to gas. Too bad he wants rust free, my 06 6.0 is for sale.There is no way I would go diesel again unless I’m hawgin a monster trailer.
Agreed. Diesel is great for towing but a 6.0 gasser is an awesome all-around unit.
Sent from my IN2019 using Tapatalk
Post by: Ryan on June 28, 2020, 09:59:54 AM
Post by: Ryan on June 28, 2020, 10:08:24 AM
Post by: KingtheZJ on June 28, 2020, 11:07:03 AM
Post by: Harrison on June 28, 2020, 12:38:05 PM
Post by: etk300ex on July 03, 2020, 03:22:14 PM
Post by: mr.mindless on July 03, 2020, 04:13:28 PM
Post by: Nick on July 03, 2020, 10:02:39 PM
Post by: M4wdFab on July 04, 2020, 01:51:14 AM
Post by: etk300ex on July 06, 2020, 12:23:11 PM
Post by: TrailTamer on July 06, 2020, 12:58:34 PM
Post by: M4wdFab on July 06, 2020, 01:02:14 PM
upper ball joints required like oil changes
flaky rear brake lights (some board or connection in tail light)
Post by: mr.mindless on July 06, 2020, 01:36:42 PM
Post by: etk300ex on July 12, 2020, 11:51:39 AM
Sent from my iPhone using Tapatalk
Post by: etk300ex on July 12, 2020, 11:59:05 AM
It has what I believe are helper springs. Half leaf with a clamp. I’ll probably remove those.
Had some water drops coming out of drivers side visor clip. Need to investigate. Seals around the cab lights?
Sent from my iPhone using Tapatalk
Post by: carchameleon on July 12, 2020, 02:29:13 PM
Post by: mr.mindless on July 12, 2020, 02:44:58 PM
Pull and RTV. Maybe put in replacement bulbs so you never have to do it again.
Post by: etk300ex on July 13, 2020, 08:26:33 AM
Post by: etk300ex on July 20, 2020, 11:46:26 AM
I'd like to put on a flatbed and side boxes for outdoor stuff storage next year, unless a smoking deal pops up.
Post by: etk300ex on July 20, 2020, 11:47:32 AM
Post by: etk300ex on July 22, 2020, 12:13:55 PM
Post by: mr.mindless on July 22, 2020, 12:29:25 PM
Post by: etk300ex on July 22, 2020, 12:55:03 PM
Post by: etk300ex on July 27, 2020, 10:47:17 AM
Cab lights resealed properly. I could not find the bulbs in stock anywhere, only led replacements in super white, yuck.
Post by: mr.mindless on July 27, 2020, 11:23:42 AM
Post by: etk300ex on July 27, 2020, 11:31:48 AM
Post by: etk300ex on July 29, 2020, 12:56:05 PM
Post by: M4wdFab on July 29, 2020, 01:32:41 PM
Post by: etk300ex on August 11, 2020, 11:37:17 AM
(https://uploads.tapatalk-cdn.com/20200811/d1f065452da09dc97a3f2ee049acecf3.jpg)
Sent from my iPhone using Tapatalk
Post by: mr.mindless on August 11, 2020, 12:19:50 PM
Post by: Wingman on August 11, 2020, 05:54:34 PM
Post by: etk300ex on September 08, 2020, 05:02:25 PM
Logged a few thousand this summer. I love it other than the the cruise is terrible and I miss the console shifter.
Last Thursday the exhaust broke the weld and pulled out of the catalytic converter. Nothing to clamp to on converter. Was 3 hours away, drove to the nearest town. Loudly lol. I was turned down at Monroe Muffler and Mavis as there company policy is they couldn't put it on the lift because it was unbalanced. They have drive on lifts ::). Would have been an easy weld. After an hour on the ground in a Napa parking lot I ended up mending it with a band clamp and some water hardening exhaust wrap lol. It worked well and is hard as steel now. New converter on the way.
Post by: M4wdFab on September 08, 2020, 05:13:26 PM
Post by: etk300ex on September 08, 2020, 05:16:30 PM
Post by: M4wdFab on September 08, 2020, 05:18:07 PM
Post by: etk300ex on September 08, 2020, 05:18:30 PM
let me know if you want to throw this hog on a lift some time and give her a once over. probably have some time next week or week after.
That would be good. I need to talk to you about some winter projects on this unit. Or may like two weeknights for you haha.
Post by: etk300ex on September 15, 2020, 11:09:27 AM
Post by: etk300ex on November 09, 2020, 01:11:30 PM
(https://uploads.tapatalk-cdn.com/20201109/b1ff982de5569db659aa031288d41a24.jpg)
Sent from my iPhone using Tapatalk
Post by: M4wdFab on November 09, 2020, 06:21:03 PM
not betting they are
Post by: Wingman on November 09, 2020, 06:21:20 PM
Post by: mr.mindless on November 09, 2020, 06:32:32 PM
Post by: cracker on November 10, 2020, 07:56:16 AM
Post by: etk300ex on February 09, 2021, 07:18:34 PM
loloracks.com/the-rack
Sent from my iPhone using Tapatalk
Post by: etk300ex on February 09, 2021, 07:20:13 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on February 09, 2021, 07:25:58 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on May 11, 2021, 09:30:54 AM
Pro tip- The cab seals from the 2006-2008 Ram are tapered where the corner of the door by the mirror pokes into where mine, 2003-2005, are not tapered and ripped.
Ram 3rd gen is real confusing. My chassis/engine configuration was not even available according to Wikipedia.
Post by: etk300ex on May 11, 2021, 09:33:44 AM
Post by: mr.mindless on May 11, 2021, 09:51:38 AM
Post by: etk300ex on May 11, 2021, 09:58:16 AM
Post by: M4wdFab on May 11, 2021, 11:15:39 AM
(2) 2"x4" box tube steel 11 gage (1/8") 24' sticks
(3) 2"x2" box tube steel 7 gage (3/16") 24' sticks
(2) diamond plate sheet steel 11gage (1/8") 4'x8' sheets
Post by: etk300ex on May 17, 2021, 11:14:05 AM
Post by: mr.mindless on May 17, 2021, 11:24:47 AM
Post by: etk300ex on May 17, 2021, 11:49:33 AM
Post by: M4wdFab on May 18, 2021, 06:19:44 PM
https://www.facebook.com/marketplace/item/807647786531741/
Post by: M4wdFab on May 20, 2021, 09:16:18 AM
steel prices are NUTS
i would recommend not doing this now eric
(2) 2"x4" box tube steel 11 gage (1/8") 24' sticks 297$ each
(3) 2"x2" box tube steel 7 gage (3/16") 24' sticks 270 each
(2) diamond plate sheet steel 11gage (1/8") 4'x8' sheets 478 each
quote good for 24hrs only
crazy
Post by: mr.mindless on May 20, 2021, 10:14:01 AM
Post by: M4wdFab on May 20, 2021, 11:39:06 AM
Post by: M on May 20, 2021, 12:00:00 PM
Post by: M4wdFab on May 20, 2021, 01:02:49 PM
i paid 1.34/lb earlier in the year when i bought materials for 2 flatbeds
those prices are pushing $2.61/lb
Post by: etk300ex on May 22, 2021, 03:44:01 PM
Post by: etk300ex on June 03, 2021, 08:18:31 AM
Boxes acquired
Post by: Wingman on June 03, 2021, 08:37:49 AM
Post by: etk300ex on June 03, 2021, 09:58:14 AM
Post by: etk300ex on June 03, 2021, 10:14:18 AM
Post by: mr.mindless on June 03, 2021, 10:24:43 AM
Check marketplace. I’m sure some advertise. I think thruway spring up fits and sells beds. They definitely do plows.
Post by: M4wdFab on June 03, 2021, 12:43:52 PM
https://davistrailerworld.com/
Post by: M4wdFab on June 03, 2021, 12:48:39 PM
https://wilbriinc.com/
Post by: luvmyxj on June 03, 2021, 01:04:57 PM
Post by: M4wdFab on June 03, 2021, 01:14:04 PM
Post by: mr.mindless on June 03, 2021, 02:21:01 PM
You did buy one more recently than… oh wait I never have haha
Post by: Nick on June 03, 2021, 06:08:22 PM
Post by: M4wdFab on June 03, 2021, 06:13:43 PM
my Cadet bed was like 4500 installed dealer price (outsourced to a PA install place, probably included a little mark up for dealer)
Post by: Nick on June 03, 2021, 06:15:31 PM
Post by: etk300ex on June 07, 2021, 09:34:47 AM
Post by: TrailTamer on June 07, 2021, 01:17:12 PM
Post by: etk300ex on June 13, 2021, 03:22:01 PM
Post by: M4wdFab on June 13, 2021, 09:03:28 PM
wonder if the price is why they are sitting there
Post by: mr.mindless on June 13, 2021, 10:14:48 PM
Post by: cracker on June 14, 2021, 09:18:05 AM
Post by: mr.mindless on June 14, 2021, 09:24:15 AM
Post by: etk300ex on June 14, 2021, 10:20:15 AM
Post by: luvmyxj on June 18, 2021, 11:48:56 AM
https://www.facebook.com/marketplace/item/2877027615899966/?ref=facebook_story_share
Post by: M on June 18, 2021, 12:08:07 PM
Post by: etk300ex on June 18, 2021, 01:21:12 PM
Post by: mr.mindless on June 18, 2021, 01:45:38 PM
hope it's right length & width!
Post by: M4wdFab on June 18, 2021, 04:53:25 PM
Post by: etk300ex on July 12, 2021, 10:46:55 AM
Aluma 81096 -$2895. Not in stock, no idea when, probably will cost more if you order. lol, ok
Aluma 81106 -$3058. (3) in stock.
Post by: mr.mindless on July 12, 2021, 10:57:58 AM
Post by: etk300ex on July 12, 2021, 11:43:45 AM
Aluma 81096 -$2670. Not in stock, September with order and deposit.
Aluma 81106 -$2835. Not in stock, September with order and deposit.
I found a price list online from 2020. $2k and $2115.
Post by: etk300ex on July 13, 2021, 09:44:11 AM
Post by: etk300ex on July 13, 2021, 09:44:55 AM
Post by: etk300ex on July 19, 2021, 01:39:55 PM
(https://uploads.tapatalk-cdn.com/20210719/445a8b2e653018f6acc7481e7a934737.jpg)
Post by: mr.mindless on July 19, 2021, 03:38:24 PM
Post by: etk300ex on July 31, 2021, 07:42:59 PM
Post by: etk300ex on July 31, 2021, 07:45:27 PM
Post by: mr.mindless on July 31, 2021, 07:46:38 PM
I'm also guessing by color that is poly and not rubber. poly isn't a good fit for that application IMO, asking too much deformation with that link style.
Post by: KingtheZJ on July 31, 2021, 08:03:17 PM
Post by: M4wdFab on August 02, 2021, 11:45:56 PM
alum flat bed, looks good. listed 1 hour ago, 1600$
Post by: etk300ex on August 03, 2021, 09:24:38 AM
Post by: mr.mindless on August 03, 2021, 09:28:52 AM
Post by: M on August 03, 2021, 09:35:04 AM
Post by: etk300ex on August 03, 2021, 08:08:56 PM
Post by: mr.mindless on August 03, 2021, 09:52:16 PM
Post by: M4wdFab on August 03, 2021, 10:43:50 PM
def score.
Post by: etk300ex on August 04, 2021, 06:30:01 AM
Post by: M on August 04, 2021, 02:07:35 PM
Post by: TrailTamer on August 04, 2021, 06:55:08 PM
I probably missed it, why flatbed?
I debated to ditch the bed for flatbed or preferably a utility bed, but playing with numbers and looks like regular bed or flatbed are best if I stay SRW. Utility bed make 19.5” SRW wheels (yuck) or dually mandatory. Going dually will really open up availability on flat beds & utility beds to choose from.
Post by: etk300ex on August 05, 2021, 02:51:43 PM
Post by: M4wdFab on August 27, 2021, 01:33:33 PM
Post by: M4wdFab on August 27, 2021, 05:02:48 PM
she gone
Post by: etk300ex on August 30, 2021, 08:54:31 AM
Bonus, this allowed all factory wiring to remain in tact. I would like to figure out a way to mount the factory lights under the bed to get rid of the "lamp out" light but they're super bulky. Maybe they'll fit in the spare tire.
Post by: etk300ex on August 30, 2021, 08:59:29 AM
Post by: etk300ex on August 30, 2021, 09:01:41 AM
Post by: Ryan on August 30, 2021, 10:52:32 AM
It was a very demoralizing day as an electrical person lol. I don't understand why the 3-2 wire converters didn't work.
Because it is a Dodge.
The canbus on the Dodge trucks of this generation is a very hard system to work with. If its not perfect it will not work. Nice call on using the trailer wiring.
Post by: mr.mindless on August 30, 2021, 11:15:23 AM
Post by: etk300ex on August 31, 2021, 11:36:22 AM
Post by: M4wdFab on August 31, 2021, 05:37:28 PM
Post by: etk300ex on August 31, 2021, 05:46:33 PM
Post by: etk300ex on August 31, 2021, 05:53:20 PM
Post by: etk300ex on September 11, 2021, 01:01:39 PM
(https://uploads.tapatalk-cdn.com/20210911/f0da0ff8fd1b12c7f3b8b6e4266fc7b7.jpg)
(https://uploads.tapatalk-cdn.com/20210911/060853ca18a5f3ddff38b63a0c30750c.jpg)
(https://uploads.tapatalk-cdn.com/20210911/c0a759ee7048c75976fc89b427e21858.jpg)
Post by: etk300ex on September 23, 2021, 12:22:53 PM
(https://uploads.tapatalk-cdn.com/20210923/20bfb00d9a64a4769c47350345c1dc9f.jpg)
Post by: etk300ex on September 23, 2021, 12:23:15 PM
Post by: etk300ex on September 23, 2021, 12:27:06 PM
Post by: M on September 23, 2021, 12:35:55 PM
Post by: etk300ex on September 23, 2021, 12:41:27 PM
Post by: etk300ex on September 23, 2021, 12:44:57 PM
Post by: M4wdFab on September 23, 2021, 12:45:34 PM
Post by: etk300ex on September 23, 2021, 12:49:36 PM
Post by: etk300ex on September 23, 2021, 12:51:44 PM
Post by: M on September 23, 2021, 01:06:39 PM
It is a cool resort, We had a condo with an amazing view. It sucked having the downhill finish at the bottom of the hill though. Had to walk up. The lift line was hours long after the race lol.
Ahh, for a DH race... resort at the bottom is better for spectating lol
Post by: etk300ex on September 24, 2021, 09:38:10 AM
You guys may particularly like the steam engine. 12 wheel drive. It has a two steam cylinder transmission to drive shafts to differentials. The engineer said it could go up a 12% grade fully loaded with logs. It also had a steam powered water pump so it can stop at any water source and fill up, which we did on our ride. Pretty neat. It was barely puffing hauling 4 passenger cars on a flat grade. https://www.railwaywondersoftheworld.com/heisler_locomotive.html
Post by: etk300ex on September 24, 2021, 09:39:39 AM
Post by: mr.mindless on September 24, 2021, 01:03:39 PM
Post by: etk300ex on September 24, 2021, 01:32:50 PM
Post by: mr.mindless on September 24, 2021, 02:11:52 PM
Post by: etk300ex on September 24, 2021, 02:24:40 PM
Post by: M on September 24, 2021, 05:35:10 PM
Post by: etk300ex on September 28, 2021, 12:50:06 PM
Post by: etk300ex on September 28, 2021, 01:07:15 PM
Looking at this compressor/tank unit: https://www.quadratec.com/products/92043_611.htm
It seems all stand alone compressors rated to directly inflate tires are much more expensive than this whole unit...
Post by: M on September 28, 2021, 01:49:10 PM
I think the current comparable version is Viair 90P. (the current 85P is weaker than my 70P)
Post by: TrailTamer on September 28, 2021, 02:00:17 PM
Post by: etk300ex on October 11, 2021, 09:16:23 AM
Post by: mr.mindless on October 11, 2021, 10:54:06 AM
Post by: etk300ex on October 26, 2021, 01:48:19 PM
Post by: Wingman on October 26, 2021, 03:26:53 PM
Post by: etk300ex on April 24, 2022, 12:13:56 PM
Post by: etk300ex on April 24, 2022, 12:23:23 PM
Can’t post pic >:/
Post by: etk300ex on April 24, 2022, 01:48:01 PM
Post by: etk300ex on April 24, 2022, 04:01:22 PM
Post by: etk300ex on April 24, 2022, 05:25:00 PM
I’m going to go scrub all of the blood off of my arms and hands lol.
Post by: Wingman on April 24, 2022, 08:59:21 PM
Post by: etk300ex on May 04, 2022, 09:29:21 AM
It did stall on me again this weekend. It occasionally happens while coming to an abrupt stop. It had over a half tank of fuel so I'm not sure how it could be fuel related but it seems like a fuel related symptom. Any ideas?
Post by: mr.mindless on May 04, 2022, 12:52:38 PM
Post by: etk300ex on May 04, 2022, 04:00:06 PM
No IAC listed on RA
Chilton's Manual:
IDLE AIR CONTROL MOTOR
DESCRIPTION
A separate IAC motor is not used with the 5.7L V-8 engine
5.7L V-8
The IAC motor is not serviceable on the 5.7L V-8 engine.
Does that mean it's one with the throttle body?
Post by: etk300ex on May 04, 2022, 04:02:41 PM
Quote
The 5.7L Hemi does not have an idle control valve. Idle speed is regulated by the computer by opening or closing the throttle plate itself. The motor is a non serviceable part of the throttle body. The entire throttle body would need replaced if malfunctioning.
Post by: mr.mindless on May 04, 2022, 04:42:49 PM
Clean throttle body and make sure nothing is sticking?
but it's moving all the time. that certainly would cause other drivability issues if it were the cause.
Vacuum leak check? I have a smoker now.
I don't believe I have the technology to look at anything useful in detail.
Post by: etk300ex on May 06, 2022, 10:45:28 AM
(https://uploads.tapatalk-cdn.com/20220506/98104a08862f6bf2e3df60587dd2dde8.jpg)
Post by: etk300ex on May 11, 2022, 08:04:06 AM
Post by: mr.mindless on May 11, 2022, 09:26:15 AM
(which is never a gas cap seal in things this age)
Post by: cracker on May 13, 2022, 12:09:21 PM
Been fighting with "small evap leak" code P0456 on the Liberty, finally replaced the gas cap to see if that would fix it.. it stayed away for while so I decided to go ahead and make an appt for an inspection since it was almost a month overdue.. as I am going to the appt the CEL came back on, decided to go to appt anyway to hopefully get a temp sticker. shop owner gave me a fool proof way to get it to pass, and it did... he said fill the tank, clear the code, and never let it get off full for a few days of driving.. did this for 5 days and it passed inspection.
Post by: etk300ex on May 13, 2022, 12:14:42 PM
Post by: M4wdFab on May 13, 2022, 12:18:19 PM
clearing the codes will reset ALL your emission monitors,
depending on the year you are allowed 1 or 2 monitors to not be "ready" to pass.
all the evap leaks i have had to fix are rotten rubber boots on canisters, rotten fuel filler necks, fuel pump gaskets bah
Post by: M4wdFab on May 13, 2022, 12:19:35 PM
Post by: carchameleon on May 18, 2022, 02:50:25 PM
speaking of evap leaks..
Been fighting with "small evap leak" code P0456 on the Liberty, finally replaced the gas cap to see if that would fix it.. it stayed away for while so I decided to go ahead and make an appt for an inspection since it was almost a month overdue.. as I am going to the appt the CEL came back on, decided to go to appt anyway to hopefully get a temp sticker. shop owner gave me a fool proof way to get it to pass, and it did... he said fill the tank, clear the code, and never let it get off full for a few days of driving.. did this for 5 days and it passed inspection.
Since I posted this I got a PO456 (EVAP very small leak) on my Frontier ::)
I have that same code on Sasha's Camry and the gas cap didn't fix either...
it stays away long enough to get Pauly to scan it to pass.
at some point I think I'm just going to drop it off and have him figure it out.
Post by: etk300ex on June 02, 2022, 09:35:25 AM
Stock wheels 17x7.5
Stock tires 265/70/R17...31.6x10.4
285/70R17...32.7X11.2
295/70R17...33.3X11.6
285/75/17...33.8X11.2
305/70R17...33.8X12
275/80R17...34.4X10.8
315/70R17...34.4X12.4
275/70R18...33.2X10.8
Post by: etk300ex on June 18, 2022, 05:26:24 PM
(https://uploads.tapatalk-cdn.com/20220618/0b7b119d71915484ce819ca4e0c2b411.jpg)
Post by: etk300ex on June 20, 2022, 12:08:19 PM
I won't give up on my dream to have a working CB! I've never had one that worked haha.
Post by: mr.mindless on June 21, 2022, 07:54:37 AM
Any loops in wire? No continuity between shield and core?
Post by: etk300ex on July 05, 2022, 10:10:31 AM
Post by: mr.mindless on July 05, 2022, 11:59:55 AM
Post by: etk300ex on July 19, 2022, 11:08:38 AM
I bought a new firestick with adjustable end and a short cable. Tuned pretty good. Did not hear anything on last weeks trip to Wilmington (Lake Placid) and back :(. I have another CB I'll swap. After that, I will give up on my hopes and dreams.
No stalling issues lately. Sometimes cruise shuts off and won't come back on until restart. Usually happens as soon as I get on a highway lol. Overdrive stinks in the mountains, I just shut it off now.
Post by: Wingman on July 19, 2022, 07:50:58 PM
Post by: mr.mindless on July 19, 2022, 10:35:30 PM
just a thought. I can't remember if I found the cause for that on the dakota but it intermittently did the same - even though it was fully previous generation, so not likely same cruise system
Post by: M4wdFab on July 20, 2022, 08:14:49 AM
Post by: etk300ex on August 05, 2022, 08:15:31 AM
Spare tire leaks around the bead but will hold 40 psi indefinitely. Harbor Freight HD air compressor came in handy. Thing gets so hot you have to let it cool for 10 min before you can move it.
Cruise would shut off from time to time but would immediately come back on with the on button.
Post by: etk300ex on August 10, 2022, 03:25:26 PM
Post by: etk300ex on October 05, 2022, 10:26:14 AM
Lamp out light comes on and goes off and dings every time. No lamps are out. Ram forums says this is common and eventually a lamp will go out. It may be weeks or months.
Post by: M4wdFab on October 05, 2022, 12:49:44 PM
Post by: etk300ex on October 05, 2022, 02:00:31 PM
Post by: mr.mindless on October 05, 2022, 02:23:18 PM
I got a standalone voltage regulator for mine to hopefully take care of the pulsing overcharge. I've read I need to put a resistor in the right place to prevent a check gauges & ding...
Post by: etk300ex on October 15, 2022, 12:41:22 PM
Post by: etk300ex on October 15, 2022, 02:25:27 PM
(https://uploads.tapatalk-cdn.com/20221015/fa232af9b6704d4857414e9af9aadc8b.jpg)
Post by: M4wdFab on March 24, 2023, 09:43:59 PM
Took apart the tail lights and mounted the modules + bulbs under the bed.
in your research, any other solution for playing nice with LED flat bed bulbs? looking like im going to do my uncles 06 cummins this year at some point.
Post by: M4wdFab on March 24, 2023, 09:51:03 PM
6 ohm, 50 watt
in parallel on each light signal
Post by: etk300ex on March 27, 2023, 10:35:45 AM
Post by: etk300ex on April 26, 2023, 03:10:15 PM
https://www.ebay.com/itm/314533229922?fits=Year%3A2003%7CMake%3ADodge%7CModel%3ARam+2500%7CTrim%3ASLT+Crew+Cab+Pickup+4-Door%7CEngine%3A5.7L+345Cu.+In.+V8+GAS+OHV+Naturally+Aspirated&_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3D4c971108460e4e5d864592e780acae11%26pid%3D101195%26rk%3D1%26rkt%3D12%26sd%3D314533227231%26itm%3D314533229922%26pmt%3D1%26noa%3D0%26pg%3D3458402%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V4V6ItemNrtInQueryAndCassiniVisualRankerAndBertRecall%26brand%3DDodge&_trksid=p3458402.c101195.m1851&amdata=cksum%3A3145332299224c971108460e4e5d864592e780acae11%7Cenc%3AAQAIAAABQA2rugFlOq3qu1cLac%252F%252Fk6Vp0Oa0HaJIqoXKeIiOR%252BTUgsSvHaeyPxKYu6UqHqq7GaGyKVqHQnjeiiXcQpMGw2t3aB%252BssGfjtIWOBj8wExc7oYYP7xGMyQCrHDyDaSaWjFi2ZIg6F8qlmuosEEajR7I%252BJUlzbEo%252BsJrCepCd6RUhDW%252FYW6aU%252BeCFjzMGhMPF1EIDKyr%252B7MLAmZdVUfCyjribxRV3Zh4K0d%252FpJVbxDH0alIU3veT4FkDHoJrUWbQfZU7OEETIMMqPXwIDKfRFp101iJ6v%252FFsYLJ76XAT1BwqG9quhV9dm1qvSLOf36AOpYcJHy12cksVv2R9ePPuHs2QEMvnnKUNbiO%252FMEfU%252FXeKRrDNmJdPI1p2RMBVS3BboD%252BcrnHp3d6HlH%252BiUiJcPYQZf1ZmVMlEGvK%252FiLnnY9bVd%7Campid%3APL_CLK%7Cclp%3A3458402
Post by: etk300ex on April 26, 2023, 04:31:54 PM
Post by: etk300ex on May 05, 2023, 03:37:53 PM
Can't post pics, gallery comes up but its blank.
Post by: etk300ex on May 05, 2023, 03:59:43 PM
(https://uploads.tapatalk-cdn.com/20230505/2a7ef188b63053e7e5edbce2f8614362.jpg)
(https://uploads.tapatalk-cdn.com/20230505/59cf6e9c7981f5dcb01c6f31d03b97a1.jpg)
Post by: etk300ex on May 05, 2023, 04:04:11 PM
Post by: mr.mindless on May 06, 2023, 08:32:45 AM
I went iPad mini Navi on the Utah trip, I don’t think I’ll go back.
Post by: M4wdFab on May 06, 2023, 09:53:23 AM
Post by: etk300ex on May 08, 2023, 09:34:43 AM
I installed new door seals and cab lights last year.
Post by: etk300ex on May 08, 2023, 10:22:58 AM
Post by: etk300ex on May 08, 2023, 03:00:11 PM
Post by: etk300ex on May 08, 2023, 03:08:24 PM
Post by: etk300ex on May 12, 2023, 12:23:12 PM
Post by: etk300ex on May 13, 2023, 06:57:28 AM
(https://uploads.tapatalk-cdn.com/20230513/b7107d8859b4e14eeb9bbc98ac006508.jpg)
Sent from my iPhone using Tapatalk
Post by: etk300ex on May 17, 2023, 10:01:29 AM
Post by: M4wdFab on May 17, 2023, 03:01:40 PM
Post by: etk300ex on May 17, 2023, 07:02:38 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on May 22, 2023, 09:52:38 AM
Post by: mr.mindless on May 22, 2023, 11:07:17 AM
that's an electronic throttle on a 5.7 HEMI, isn't it?
if it were a couple years older with cables, I'd say you need to adjust the TV cable for just barely less aggressive downshifting.
Post by: etk300ex on May 22, 2023, 11:14:46 AM
Post by: etk300ex on May 24, 2023, 10:29:26 AM
Post by: etk300ex on June 09, 2023, 04:08:47 PM
Sent from my iPhone using Tapatalk
Post by: mr.mindless on June 09, 2023, 04:11:39 PM
Post by: etk300ex on June 10, 2023, 07:57:49 AM
Sent from my iPhone using Tapatalk
Post by: etk300ex on June 13, 2023, 11:30:59 AM
Executed the above windshield holder-upper reseal. It was dried out and there is literally a scoop right below it for hvac intake. It seems unlikely that enough rain could go through that little hole to soak the carpet but, we'll see. Then again, I couldn't believe the amount of water coming in from the cab lights.
Dry as can be after yesterdays 8 hour monsoon. I can't belive this was it...
Post by: etk300ex on June 28, 2023, 01:58:33 PM
Should I do the steering box brace while I'm there? Looking at how the box is mounted, I really have a hard time accepting that there could be any significant amount of flex there...
Just had the pump replaced. All the joints look tight.
Post by: M4wdFab on June 28, 2023, 03:44:57 PM
Post by: mr.mindless on June 28, 2023, 03:48:32 PM
Post by: M4wdFab on June 28, 2023, 03:50:03 PM
Link bushing wear can cause a pull or dive to one side on braking as worn link bushings compress at different rates.
i forgot my 01 ram 2500 did this like crazy, Tom and i found it one night, lower control arm bushing at frame had like 1/2" play front to back lol
Post by: mr.mindless on June 28, 2023, 04:02:08 PM
Post by: M4wdFab on June 28, 2023, 04:18:54 PM
Post by: etk300ex on June 28, 2023, 05:20:16 PM
what do you have the toe set at?
As purchased
Post by: etk300ex on June 28, 2023, 05:28:32 PM
Post by: mr.mindless on June 29, 2023, 08:39:37 AM
Post by: etk300ex on June 29, 2023, 08:49:25 AM
Post by: etk300ex on July 04, 2023, 06:48:26 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on July 04, 2023, 06:52:23 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on July 13, 2023, 08:49:15 AM
I stumbled on a youtube video on how to adjust the dodge steering box. Tightened the adjuster 4 full rotations (which I believe is quite a bit according to video) and was able to get my steering from 4" of slop to less than 2", which is spec. It's so much better! The video said to tighten it until it binds and then back it off, but I didn't go that far.
My swing out receiver hitch has failed, one of the latch hook bolt heads broke off and bent the crap out of the hook. I was going to weld it on but I couldn't come up with a way to bend it back and its cracked anyway. Bushings are shot as well.
Post by: etk300ex on July 13, 2023, 08:51:25 AM
(https://cdn11.bigcommerce.com/s-y6o5zvrdo1/images/stencil/1280x1280/products/242/909/1.5-RakAttach-Passenger__84552.1680901557.jpg?c=1)
Post by: etk300ex on July 13, 2023, 08:56:45 AM
(https://m.media-amazon.com/images/I/61XKUf1BNUL._AC_SX522_.jpg)
Post by: mr.mindless on July 13, 2023, 09:28:14 AM
4 turns is a TON.
Be _very_ careful adjusting that - I went a sneeze too far once and found a tiny spot that a steering box bound up while on the road and it came as a surprise. which... isn't good.
Post by: etk300ex on July 13, 2023, 09:49:56 AM
Quote
The video said to tighten it until it binds and then back it off, but I didn't go that far.
Yes, I was quite concerned about that. I jacked the axle up and turned lock to lock multiple times at each adjustment. I did go 1/4 turn at a time. I put 400 miles on it this past weekend.
Post by: etk300ex on July 13, 2023, 02:38:22 PM
Post by: mr.mindless on July 13, 2023, 03:32:04 PM
Post by: etk300ex on July 13, 2023, 04:47:52 PM
Post by: etk300ex on September 22, 2023, 03:19:42 PM
Post by: M4wdFab on September 22, 2023, 05:26:49 PM
wonder if its weight or drag thats switching on the shake.
Post by: etk300ex on September 24, 2023, 05:21:11 PM
In other news, it drives a lot nicer with new stabilizer.
Post by: etk300ex on September 27, 2023, 06:41:02 PM
(https://uploads.tapatalk-cdn.com/20230927/3f7cf5e0e2a0f8c6458f03e97b9e1c08.jpg)
Post by: Wingman on September 27, 2023, 11:17:12 PM
Post by: etk300ex on September 28, 2023, 08:08:12 AM
Post by: M on September 28, 2023, 10:03:59 AM
I am thinking about that. I seriously doubt I'll ever need it though.
pretty vulnerable position... tree branch fall on it, bet ya wish you had a backup in that size.
Post by: etk300ex on September 28, 2023, 11:03:09 AM
Post by: etk300ex on September 28, 2023, 12:39:41 PM
Post by: etk300ex on October 09, 2023, 09:26:54 AM
Post by: etk300ex on October 17, 2023, 12:34:38 PM
Post by: etk300ex on October 17, 2023, 12:35:12 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on October 17, 2023, 12:35:34 PM
Sent from my iPhone using Tapatalk
Post by: etk300ex on October 17, 2023, 12:36:35 PM
(https://uploads.tapatalk-cdn.com/20231017/3ee3ee56eb726121c310501ca8508467.jpg)
Sent from my iPhone using Tapatalk
Post by: M4wdFab on October 17, 2023, 02:13:41 PM
Post by: etk300ex on October 19, 2023, 01:54:42 PM
(https://uploads.tapatalk-cdn.com/20231019/73e2d2abb42d03680630b1614efa92ff.jpg)
Sent from my iPhone using Tapatalk
Post by: mr.mindless on October 19, 2023, 02:17:50 PM
Post by: etk300ex on October 19, 2023, 02:47:36 PM
If you can't dodge it ram it ;) ::) :-X