M4wd&Fabrications

Projects place => Tech => Topic started by: gif on February 28, 2016, 10:22:03 AM

Title: low profile brake master cylinder - 7/8 Bore
Post by: gif on February 28, 2016, 10:22:03 AM

looking for a master that can fit under the floor of my current project (non 4X4).

I have 3-4 inches total height to work with.

Most catalogs only give the bore specs and not the overall dimensions.

Right now im looking at a remote reservoir setup...


What have you seen that is low profile?

Title: Re: low profile brake master cylinder - 7/8 Bore
Post by: M4wdFab on February 28, 2016, 11:11:27 AM

the willwood setup i have in the bro lite is prett small  it was 130$ ish