M4wd&Fabrications

Projects place => Projects Section => Topic started by: etk300ex on January 04, 2015, 06:06:37 PM

Title: Titan axle vent mod
Post by: etk300ex on January 04, 2015, 06:06:37 PM

Common on Titans for the rear axle vent to stick and blow out axle seals.  I ripped the cap of off the stock unit and it gassed air out for 5 minutes.  Oil is all foam.  You should check yours Tom.

$20 in parts from Amazon
Part # for 1/4" nipple that screws into stock hole: Toyota 90404 51026


(http://tapatalk.imageshack.com/v2/15/01/04/1ca4044b65977db9fa2f04f6b9ca23f1.jpg)

(http://tapatalk.imageshack.com/v2/15/01/04/dc25286bad716ae29a1070b79c649135.jpg)

Title: Re: Titan axle vent mod
Post by: dubt on January 04, 2015, 08:51:02 PM

Thanks