M4wd&Fabrications

Projects place => Classifieds => Wanted => Topic started by: KingtheZJ on June 27, 2013, 08:52:15 AM

Title: Brett needs hubs machened
Post by: KingtheZJ on June 27, 2013, 08:52:15 AM

ford D60 hubs tuned down a little to fit dodge wheels


who in rochester could do this? recommendations?

this is what i came up with:
http://www.yellowpages.com/rochester-ny/machine-shops

Title: Re: Brett needs hubs machened
Post by: rangerover on June 27, 2013, 08:56:31 AM

Engine Assembly may be able to do this. They're right off university @ winton

 47 Halstead St, Rochester, NY ‎
(585) 288-6990

Title: Re: Brett needs hubs machened
Post by: matt on June 27, 2013, 12:01:14 PM

How much material you need off?

Title: Brett needs hubs machened
Post by: mr.mindless on June 27, 2013, 12:08:23 PM

Grinder in a vice spindle clamped to the bench hub with the rotor and studs out. Fresh grinding stone for a good square edge. That's how I turned my ford hubs down to 4.77"


Tapatalking in traffic

Title: Re: Brett needs hubs machened
Post by: M4wdFab on June 27, 2013, 12:18:22 PM

i have perfected the ID boring of carrier bearings for two piece shafts with my right angle die grinder.  was sweet machine work