M4wd&Fabrications

Projects place => Classifieds => For Sale => Topic started by: M4wdFab on April 02, 2013, 09:14:56 AM

Title: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 09:14:56 AM
unning like a top in the truck still, starts right up runs great.  1984 GMC 1ton

465 shifts good- has a PTO take off on the trans that was used to drive a hydralic pump for a dump box (pump gone, PTO and driveshaft present)

mated NP205



will split

 motor 200$   running all accessories
trans w/PTO 150$
case 100$


make offer together
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 11:36:14 AM
motor sold
grill sold
Title: Re: 1984 350, SM465/PTO, NP205
Post by: mr.mindless on April 02, 2013, 11:38:13 AM
quick
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Wingman on April 02, 2013, 11:40:56 AM
sMike's cleaning house!
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 11:42:19 AM
m4 has no mercy, will be gutted and scrapped saturday morning....
Title: Re: 1984 350, SM465/PTO, NP205
Post by: mr.mindless on April 02, 2013, 11:57:21 AM
M4 has both shop bays, and motivation.

I need to get some shit pulled tonight and shipped tomorrow.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 12:16:08 PM
shop is about 90% full haha lots of stuff going on.

heat got filled yesterday so we are back in businasty
Title: Re: 1984 350, SM465/PTO, NP205
Post by: matt on April 02, 2013, 12:17:42 PM
Always wanted a pto unit, too bad it wasn't driven off the 205.  I don't know if it will work with my nv
Title: 1984 350, SM465/PTO, NP205
Post by: GBR928 on April 02, 2013, 12:22:33 PM
Yeah no more cold = ambition!
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 12:37:26 PM
ya this one is a munice unit.  never seen it before.  has a sticker and light on the dash, levers on the floor above trans.


my ford has a pto off the 205 case.  it will get pulled and saved. 


i might keep the frame out back and try to sell.  looks like it was a lot truck and frame is in great shape.  no title, so taking in bits to metalico will have to occur. 
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Nick on April 02, 2013, 01:04:59 PM
You dont need a title at alpco just your license and they have a form thing.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 02, 2013, 02:12:02 PM
it will be cut up enough metalico will take it. 
Title: Re: 1984 350, SM465/PTO, NP205
Post by: rejeep on April 02, 2013, 03:03:25 PM
DMV form to scrap with no title... no biggie
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 06, 2013, 08:22:33 PM
Truck scrapped!

Case sold and gone.  Motor loaded for delivery
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 09, 2013, 03:11:37 PM
truck bought 950$

sold case 100$
sold motor 220$ delivered
sale pending on front stock shafts 100$
scrap 400$


knuckles listed 200$
lockouts listed
trans / PTO 150$
Title: Re: 1984 350, SM465/PTO, NP205
Post by: orange anchor on April 09, 2013, 07:03:01 PM
What happen to my deal on the front shafts. I see how you roll.  They must have better land, wheeling location connections and holiday parties.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 09, 2013, 11:48:05 PM
these are GMC part out.


Dodge axle still sitting. 
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 11, 2013, 12:02:31 PM

got interest on tires today!
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 13, 2013, 12:25:54 AM
truck bought 950$

sold case 100$
sold motor 220$ delivered
sale pending on front stock shafts 100$
scrap 400$


knuckles listed 200$
lockouts listed
trans / PTO 150$

dryrotted tires on rusty steel wheels sold today for 100$!


two suits in a dealer car rolled up to swap onto a truck going to auction tomorrow lol

i cant believe they got all 4 tires into a hatchback lol 
Title: 1984 350, SM465/PTO, NP205
Post by: mr.mindless on April 14, 2013, 12:45:58 AM
Hilarious
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on April 14, 2013, 08:59:52 AM
He wad texting like a 12 yr old.   I was expecting teethless punks, it was funny.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on September 24, 2013, 09:25:01 AM
bump  SM465 4x4, no adaptor.  shifted fine


FREE, no PTO cover
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Wingman on September 24, 2013, 09:38:16 AM
This thing have the hydraulic clutch bell?
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on September 24, 2013, 09:45:58 AM
yes, i carfully took all that stuff off the truck, should be good, with slave and MC


if it goes, ill pull the PTO off to ebay
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Wingman on September 24, 2013, 09:50:54 AM
I'll take the bell (and trans if you really want it out).  Don't need the PTO.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on September 24, 2013, 09:55:12 AM
i have no use for it, tried to get 100$ and failed, PTO should ebay for a couple bucks easier.


In the way, come get it tonight or tomorrow
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Wingman on September 24, 2013, 08:06:09 PM
Tomorrow for sure?
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on September 25, 2013, 09:22:16 AM
thats fine
Title: Re: 1984 350, SM465/PTO, NP205
Post by: matt on September 25, 2013, 12:22:52 PM
I got a sm465 to dana 300 advanced adapter for sale if your interested.
Title: Re: 1984 350, SM465/PTO, NP205
Post by: Wingman on September 25, 2013, 12:51:34 PM
If I do this, it's going to be 203/205 doubler...

But thanks!
Title: Re: 1984 350, SM465/PTO, NP205
Post by: M4wdFab on September 26, 2013, 08:55:49 AM
465 gone!