M4wd&Fabrications

Projects place => Classifieds => For Sale => Topic started by: loco on January 20, 2012, 01:11:32 PM

Title: does anyone do d44 stuff anymore?
Post by: loco on January 20, 2012, 01:11:32 PM

i have some d44 stuff laying around.
2 chevy housings. one shortened to bolt under cj as soa. takes chevy short side and wagoneer long side
2 flatop knuckles
2 flatop knuckles with forged high steer arms
1.5" dom tie rod and draglink setup with 1ton tre's
welded carrier with 4.56 gears
i think there is another set of 4.10s laying around

any interest in stuff?

Title: Re: does anyone do d44 stuff anymore?
Post by: JEEPWERX on January 22, 2012, 09:25:18 AM

I need a dana 44 hub for Cora's jeep??

WWW.JEEPWERX.COM

Title: Re: does anyone do d44 stuff anymore?
Post by: Ryan on January 22, 2012, 09:29:14 AM

You need a Scout hub, this is all Chevy stuff, I believe.

Title: does anyone do d44 stuff anymore?
Post by: mr.mindless on January 22, 2012, 10:44:40 AM

I think I still have Ford flat top knuckles spindles and hubs. And a chromo long & stub, 77 Ford.

Title: Re: does anyone do d44 stuff anymore?
Post by: JEEPWERX on January 25, 2012, 06:28:58 PM

Quote from: Profender on January 22, 2012, 09:29:14 AM

You need a Scout hub, this is all Chevy stuff, I believe.

RIGHT!!!

Title: does anyone do d44 stuff anymore?
Post by: Ryan on January 25, 2012, 07:02:03 PM

I have a scout hub if you want it.

Title: Re: does anyone do d44 stuff anymore?
Post by: dubt on January 25, 2012, 07:22:01 PM

I do but it's all that Jeep 44 stuff

Title: Re: does anyone do d44 stuff anymore?
Post by: rejeep on January 25, 2012, 09:05:32 PM

we sell hubs.. even have them in stock

Title: does anyone do d44 stuff anymore?
Post by: Ryan on January 25, 2012, 09:20:36 PM

I have the actual hub that has the wheel bearings in it. Is that what Erik needs?

Title: does anyone do d44 stuff anymore?
Post by: mr.mindless on January 25, 2012, 09:23:08 PM

I'd believe you sell lockouts, hubs would shock me.

Speaking of lockouts, I found my broken 35 spline Warn that I need to warranty sometime while cleaning the garage... You handle Warns? And is it a pain or should I go back where I bought it?

Title: Re: does anyone do d44 stuff anymore?
Post by: rejeep on January 26, 2012, 11:32:41 AM

lockout hubs yes.. also hub hubs..

Title: Re: does anyone do d44 stuff anymore?
Post by: loco on February 16, 2012, 08:29:22 AM

i take that as a no.

ok it's all going to scrap, by next weekend. . .

it's all chevy "large spindle"

last call

Title: Re: does anyone do d44 stuff anymore?
Post by: M4wdFab on February 27, 2012, 04:22:48 PM

i didnt read this add through but is this fit?

http://www.rc4x4.org/rcforum/index.php?topic=16392.0

Title: Re: does anyone do d44 stuff anymore?
Post by: loco on February 29, 2012, 07:17:23 AM

thanks smike,

i contacted him