M4wd&Fabrications

Projects place => Classifieds => Wanted => Topic started by: KingtheZJ on July 13, 2012, 10:20:12 PM

Title: 231 Rear Output shaft
Post by: KingtheZJ on July 13, 2012, 10:20:12 PM

picked up a case a while back that has a bent external slip yoke shaft. this is what would be left over if you did a SYE

Title: Re: 231 Rear Output shaft
Post by: Wingman on July 14, 2012, 07:30:49 AM

So, you are selling the case or just the bent shaft?  Or need the shaft?

Title: Re: 231 Rear Output shaft
Post by: KingtheZJ on July 14, 2012, 08:49:26 AM

need a new shaft

Title: Re: 231 Rear Output shaft
Post by: Callelle on July 14, 2012, 10:06:50 AM

I might still have my shaft from when I did my SYE. Ill take a look when I get home tomorrow.

Title: Re: 231 Rear Output shaft
Post by: KingtheZJ on July 18, 2012, 08:54:34 PM

any word on this, Josh? i'm looking for it sooner than later

Title: Re: 231 Rear Output shaft
Post by: Callelle on July 18, 2012, 11:27:45 PM

Forgot about this, my bad. Just wrote down a note so Ill remember to check in the morning.

Title: Re: 231 Rear Output shaft
Post by: Callelle on July 19, 2012, 11:35:53 AM

I took a quick look this morning and didn't see anything. I didn't really look long because I had a family emergency in Henrietta, I'll take a more thorough look when I get home tonight.

Sent from my Samsung Galaxy S3 using Tapatalk.

Title: Re: 231 Rear Output shaft
Post by: KingtheZJ on July 19, 2012, 01:24:58 PM

ok thanks

Title: Re: 231 Rear Output shaft
Post by: Callelle on July 19, 2012, 06:38:00 PM

I looked all over my shop and where my parts that I replaced were and couldn't find it. Must have gotten mixxed in with my last scrap run I did. Sorry Spencer.

Title: Re: 231 Rear Output shaft
Post by: KingtheZJ on July 19, 2012, 10:40:03 PM

no worries. thanks for looking