Post by: M4wdFab on July 07, 2020, 10:16:13 PM
129 lots
not much good this time.
Post by: mr.mindless on July 08, 2020, 08:47:19 AM
Post by: M on July 08, 2020, 09:52:40 AM
Post by: M4wdFab on July 08, 2020, 10:35:19 AM
my new trans jack just came in 208$ for a teloscoping 1100lb one.
i bet it will go for stupid money but its a name brand nice one i think. some of the numbers were real surprising last auction.
Post by: M on July 08, 2020, 10:44:21 AM
Post by: mr.mindless on July 08, 2020, 10:47:10 AM
Plan to cross shop closer to auction end for anything that isn’t bid up too high.
More interested in racking and tire machine and press and drill press than anything on that block.
Post by: Harrison on July 08, 2020, 03:14:57 PM
Post by: mr.mindless on July 15, 2020, 09:59:22 AM
previous sander like this went for $420+18% - would be worth it at half that to me.
https://www.go-dove.com/asset/404/13309
wondering if the motor has low voltage wiring available. I think most do, but I think not all. is described as 3ph/480/60.
I'm sure the band saws are going to go for real money, the trans jack is nearing retail price already. gantry crane is interesting but not more than about $300 interesting, and its at 225.
both drill presses are of interest.
https://www.go-dove.com/asset/406/13309
https://www.go-dove.com/asset/366/13309
Post by: M4wdFab on July 15, 2020, 11:57:54 AM
that little drill press and press are both nice, i have used them for years. has foot petal start too.
Post by: M4wdFab on July 15, 2020, 12:21:39 PM
Post by: M4wdFab on July 15, 2020, 12:52:25 PM
id love it, but it would have to live down stairs lol
https://surplusrecord.com/cgi-bin/adpop.pl?115935
Post by: mr.mindless on July 15, 2020, 01:08:23 PM
If I can’t grab one of those at auction I might do your 3/4 horse
Post by: cracker on July 15, 2020, 01:33:27 PM
Post by: M4wdFab on July 15, 2020, 02:38:44 PM
Post by: mr.mindless on July 15, 2020, 04:00:03 PM
I think I could move my forklift anywhere with a lift easily. Just pick and set on my bed.
Haven’t had 5k on my bed before, but have probably done 4500 in pin weight. But my 2500# lift does not help an 8k job much.
Post by: M4wdFab on July 15, 2020, 04:36:51 PM
i bet it will go for real money but if its like 1000$ i might consider it.
Post by: Wingman on July 15, 2020, 07:45:48 PM
Post by: etk300ex on July 15, 2020, 08:37:50 PM
Sent from my iPhone using Tapatalk
Post by: M4wdFab on July 16, 2020, 05:22:13 PM
Post by: M on July 16, 2020, 07:46:34 PM
edit: $4k. not too terrible.
Post by: mr.mindless on July 16, 2020, 08:06:27 PM
Post by: M4wdFab on July 22, 2020, 07:26:33 AM
https://www.go-dove.com/events/22441
Post by: luvmyxj on July 22, 2020, 07:30:02 PM
Post by: mr.mindless on July 22, 2020, 07:40:54 PM
Post by: M4wdFab on July 22, 2020, 08:26:59 PM
Post by: M4wdFab on July 28, 2020, 11:28:21 AM
super nice unit for doing smaller stuff but still enough ass for larger if you can chuck it up.
maybe no tooling pictures will keep the price sane. i threw some bids on it this week.
https://www.go-dove.com/asset/501/13309
Post by: M4wdFab on July 31, 2020, 06:29:27 PM
Post by: M4wdFab on September 02, 2020, 09:35:39 AM
morons
Post by: M4wdFab on September 17, 2020, 09:00:45 AM
the tool carts are in my lab. pictures suck they took.
https://www.go-dove.com/events/22640
Post by: mr.mindless on September 17, 2020, 10:27:26 AM
Post by: M on September 17, 2020, 10:49:14 AM
not surprised there are no bids on the dynos, I'm sure they'll be a pretty penny to remove... would be awfully awesome to swap my paint booth for a dyno cell 😂
I bet you'd make more money quicker compared to renting paint booth. There's always people wanting to put their vehicles on a dyno.
Post by: M4wdFab on September 17, 2020, 10:50:20 AM
Post by: mr.mindless on September 17, 2020, 11:25:38 AM
had first rando off the street come by looking for auto work. oil pan on a Honda Element? we'll see if she ever texts/calls back. Referral for a few full brake jobs will be coming sometime too. we'll see what we see with any of that.