M4wd&Fabrications
Projects place => Classifieds => Wanted => Topic started by: luvmyxj on May 08, 2016, 06:18:32 PM
-
looking for a 96 and under s10 ,running condition not important, these seem to be hard to find
-
Why pre 96. Or should it be obvious?
-
No OBD2 plug-in check required. I predict an LT1 V8 swap!!!
-
mark is correct, i also need a 700r4 which is pretty common in them
-
I have a 700r4 in my garage, from Mark. With the built TH350 holding up well I don't have short term plans for it.
-
It need to be a S-10? My friend have a 91 (first gen boxy looking body) S-10 Blazer 4 door 4x4 he might will sell.
By the way I believe 2nd gen S-10 (94-up) have 4L60E or 4L60, not 700R4. I may be wrong though.
-
well after just looking at the trans harness its not the same 4 prong connector like on the 700 in my buggy but rather a connector like this that belongs to a 4l60e (http://www.makcotransmissionparts.com/mm5/graphics/00000001/74445GK.jpg)
yeah im looking for a s10 plans are for a prerunner style truck
-
why not do a ranger to fit into brolite?
-
You can run a 700R4 and not use the electronic controls of the ECU but if the harness already has provisions for trans control, why not 4L60E?
-
bro lites are not 4wd,high hp nor street legal
i was under the impression a 700 was originally behind this but now that ive been corrected a 4l60 is what ill look for
-
anyone super bored tomorrow with hauling capabilities interested in making some money, i need this
https://buffalo.craigslist.org/cto/5581542277.html