M4wd&Fabrications
Projects place => Classifieds => For Sale => Topic started by: M4wdFab on January 24, 2014, 04:39:19 PM
-
check out this gem
http://www.ebay.com/itm/SIMADRE-2014-PORTABLE-50R-50-AMP-110-220V-PLASMA-CUTTER/181304194432?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D19839%26meid%3D4351191242385360589%26pid%3D100005%26prg%3D8934%26rk%3D4%26rkt%3D5%26sd%3D271271155937%26
-
Chinese?
-
shit i just spent half that on consumables for my machine
-
http://www.ebay.com/itm/251454315979
-
it's like a Volvo boxy but nice
-
WOW!
-
http://www.ebay.com/itm/Chevrolet-Performance-10067353-GM-Goodwrench-350-Engine-/400444180233
Chevrolet Performance 10067353 GM Goodwrench 350 Engine
1,286.99 free ship
-
that not a real GM motor just FYI..
I can get the real ones
-
http://www.ebay.com/itm/161430456658
sweet toyota, can anyone build something as nice as this for just 6k?
(http://i.ebayimg.com/00/s/MTE5NVgxNjAw/z/3vIAAOSwxH1UIPc8/$_57.JPG)
-
no comments?
-
sure, only a few thousand in parts. stock seats, half a cage, no winch, no brands listed for most parts.
-
sure, only a few thousand in parts. stock seats, half a cage, no winch, no brands listed for most parts.
The truck alone will easily go for $4k here (low rust example, not a rotten body truck). $1k rebuilt engine. Tires/wheels are $1k minimum. SAS, gears, axles $1k+ easy. No way it can be built under $6k, especially when you factor in the time and labor to build it.
-
I would never pay over 1k for a toyota ever. I dont understand why anyone would ever rebuild a 22re. There's 3k in hard parts. No time or labor factored in, not what you asked for.
-
I would never pay over 1k for a toyota ever. I dont understand why anyone would ever rebuild a 22re. There's 3k in hard parts. No time or labor factored in, not what you asked for.
Where the hell can you find a nice decent low-rust example for $1k or less? I have looked here in GA, they are priced like GOLD here unless they are rotten or beaten to shit. Here's one nice example: http://savannah.craigslist.org/cto/4664296841.html
I can understand what you mean about time/labor not factored in.
-
I got mine for 600 with easily reparable rust. That ones from Ohio, no guarantee it isn't a rusty pile underneath that "fresh paint".
-
http://www.ebay.com/itm/400793969835
Nice truck
-
They want $29,950 on web site, long drive home with that Washington state.
-
Mark is retired. And apparently bored. He's in Nebraska working on a job for the next couple of weeks. That's a relatively short distance for pick up.
Just sayin'
-
Some pretty rust-free stuff out here. Surprising.
-
not sure if any of you roll fenders - this is a great deal
http://www.ebay.com/itm/361205200781
-
i use a crescent wrench and a rubber mallet for that
-
Andy Burns could probably get you a better deal on that. He works there now, done with Dorman. That's how Timmy picked them up as a sponsor.
-
it was 89.99, now 99.99.
-
used to use a baseball ball on Hondas lol
-
good trailer tie down deals
http://www.ebay.com/itm/351300654911
http://www.ebay.com/itm/351313836415
-
That's a really good deal.
Definetly used alot of our straps for the trip to KOH. Now ready to replace the crap ones.
Always bought similar looking ones from TSC but they were $30+ and now they don't carry the blue ones.
So i bought a pair of these.
The lock release is awkward to pull but the padded extra long handles are nicer.
http://m.tractorsupply.com/en/store/smartstrapsreg%3B-8-ft-l-yellow-ratchet-x-with-snap-hooks-3333-lb-safe-work-load (http://m.tractorsupply.com/en/store/smartstrapsreg%3B-8-ft-l-yellow-ratchet-x-with-snap-hooks-3333-lb-safe-work-load)
-
i have gone through 4-5 sets of 4 over the years from similar ebay vendors. for the price they are good if used properly
-
http://www.ebay.com/itm/281569023013
3/4 drings cheap
-
http://www.ebay.com/itm/281569023013
3/4 drings cheap
ha thats funny i bought the very same ones from the same seller last July.
FYI these are the same as the WARN company ones, less the red paint on the pin.
-
i ordered 4 since all my stuff is beat / borrowed / gone
-
This machine is awesome!
http://www.ebay.com/itm/201426670642
(http://vpstestbringatrailercom.c.presscdn.com/wp-content/uploads/2015/09/37620-620x465.jpg)
-
I thought this was a good price. Is it?
http://ebay.com/itm/320860023243
-
Thought those went for about the same price in all the boat catalogs years ago.
I would stab myself in the eye over a rotary pump after a few uses. Swap that for a 12v electric with a proper nozzle. Can probably DIY for similar $ with a poly tank and HF dolly.
-
is this right for go pro?
im continually filling my 32gig cards, looking for a couple more and bigger....
http://www.ebay.com/itm/BEST-128GB-Micro-SD-Universal-Flash-Memory-Card-HC-MicroSD-TF-Adapter-Class-10-/111718783955?_trksid=p2141725.m3641.l6368
going to order a few.
-
http://www.ebay.com/itm/256GB-Micro-SD-Universal-Flash-Memory-Card-MicroSD-TF-MicroSDHC-Adapter-Class-10/331608676670?_trksid=p2047675.c100010.m2109&_trkparms=aid%3D555012%26algo%3DPW.MBE%26ao%3D2%26asc%3D20131231084308%26meid%3Dd26ea83c7f244b5288fc247fa38235b8%26pid%3D100010%26rk%3D7%26rkt%3D22%26sd%3D201376266531
256 gigs for 10$? lol
-
ah, thats the catch, hero three can only take 64 gig cards max
-
http://www.ebay.com/itm/301810602287
(http://vpstestbringatrailercom.c.presscdn.com/wp-content/uploads/2015/11/s-l720502-620x465.jpg)
-
crazy
spool gun for 44$
http://www.ebay.com/itm/NBC-200A-Miller-MIG-Spool-Gun-Pull-Feeder-Aluminum-Welding-Torch-with-1m-Cable/361536947195?_trksid=p2047675.c100010.m2109&_trkparms=aid%3D555012%26algo%3DPW.MBE%26ao%3D2%26asc%3D20131231084308%26meid%3Dd06a7367d6ca45bc83e5af152890fcaf%26pid%3D100010%26rk%3D2%26rkt%3D10%26sd%3D142116900005
easy diy trail welder
Mine got used to fix the truck that one the last brolite race