M4wd&Fabrications
Projects place => Projects Section => Topic started by: M4wdFab on February 07, 2012, 05:38:14 PM
-
Customer project:
http://www.currieenterprises.com/cestore/product.aspx?id=1219
http://www.quadratec.com/products/16007_001.htm
http://www.quadratec.com/products/16071_99.htm
details and build to follow
-
we need a date to come check it out
-
military kid, might have MMTR pick up in Brockport has pretty bad death wobble right now.
-
ditch the skycrapper get an OME and its DONE!
-
you have a link arie? ill recommend to customer.
-
...has pretty bad death wobble right now.
with that parts list, that was my first guess!
-
best one on the market..
ran one on both my lifted DD ZJ's and the YJ when i still had factory linkage...
does a VERY, VERY good job at making wheel wobble, bump steer, and shimmy...
http://www.google.com/search?source=ig&hl=en&rlz=&q=old+man+emu+steering+stabliizer&btnG=Google+Search#q=old+man+emu+steering+stabilizer&hl=en&sa=G&pwst=1&prmd=imvnsfd&source=univ&tbm=shop&tbo=u&ei=qrQxT_KaF4r40gGuqdXwBw&ved=0CFIQrQQ&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=667b2f3cce2b54ed&biw=1268&bih=680
-
Mine are better. ;D
-
having never tried I cant compare....
-
just turned into a long arm and spring kit install while we are at it..... rig being dropped off next week
-
delivery tomorrow...
-
dropped this off saturday night after FLX picnic
so far:
Front end done: Currie HD steering / stock pitman swap back, JKS front track bar, long arm brackets installed, front lower frame mounts removed, front axle / links / springs / brake lines / 5" coils / new shocks installed. tcase shifter relocation bracket installed. road tested and good to go with front end 100% complete.
install lift to rear axle, rear JKS track bar, 1" body lift, motor mount lift, install Tom woods rear drive shaft, install all 4 adjustable upper links. final adjustments.
a custom full skid is in the works its next visit to the shop, but stock skid trimmed for now.
-
It is one sweet Rubicon. Cant wait to see theskid when done
-
Is this thing going to get wheeled?
-
yes, he is joining the club and wants to bring it to rausch and WP!
-
Sweeeet
-
done minus 4 bolts that need to be put in the long arm brackets that the fine thread nuts disappeared. looks good rides good.
-
Way to go. M4wd doesn't mess around.
-
skyjacker 5" long arm kit (coils, links, bump stops, shock relocation brackets, shocks, arms, ect.)
1" body lift
MORE motor mount lift
JKS rear track bar
JKS front track bar
new SS flex lines extended
Currie HD steering
TW rear shaft
Upper rear adjustable links
Fixed rear pinion CLUNK
TCase linkage Relocation bracket installed
Temp trans lift mount bracket fabricated
-
pics or it never happened...
-
actually dont have many pics on this one, was busting ass most of the last 3 days!
[attachment deleted by admin]
-
I'll vouche for M4wd. I was there and saw it at two different points. And I have got to say that Currie steering is the bomb.
-
What did you do with the issue with the sway bar and steering issue
-
no fix, when you go full extention both sides at once, it crashes to stock bracket.
shock limit helps, but its just plain not designed to fit. lift didnt change it, as was installed before. Currie guy1 says pinion is cranked up and caster angle is way off. i measured 7.4 degrees, spec is 7 degrees. Currie guy2 says pull front axle in, or cut the bracket off.
they obviously don't know jack about anything and just sell stuff.
-
Currie guy #2 is correct.... those are pretty much your options
-
skyjacker said 29.25 we were at 28.5 already on the front lowers with stock uppers
-
coming back saturday for some suspention tweaks and a full custom tummy tuck 3/16" skid!
siiiiik!
-
Finished the skid plate on this today, this thing is sick!
-
pics or it never happened...
-
you people not on the book of faces! just give in!
[attachment deleted by admin]
-
coming back for a cage, dash tie ins came in
also needs 4 wheel locks removed.
-
dropped off tonight, stripped this kid mostly. broke my T45 Torx, progress stopped.
jeeps are so gay.
[attachment deleted by admin]
-
NY salt sucks & so do torx
-
this jeep is pretty clean, i just have junk torx
-
finished stripping it, got some tube run
[attachment deleted by admin]
-
building a cage to fit door surrounds and a fit soft top is a lot more work than i signed up for, ha
-
ton of work done today- she is looking good. soft top and door surounds fit 99% just had to make a small tweak and its all good now.
Looks sharp, should be done tonight and welded up tomorrow.
-
done.
[attachment deleted by admin]
-
I really like the double C pillar. Nice lines
-
not my design, it was a copy cat of the poison spider cage
-
Looks good. Josh has been looking to get one if your interested 4dr jk
-
this guy is coming back tonight for some work
seat and harness bars
WE beadlocks / tires
a few other things
-
new 35 MTRs mounted on Walker evans beadlocks last night
-
most sexy rubi i know...
[attachment deleted by admin]
-
comming back
trus work
the axle seal that keeps on giving
-
artec front trus installed
frame / box bolts clearanced for antirock bar
c gussets welded in
not a terrible install, worse than the JK artec truss but not too bad.
had to pull coils and shocks, and passenger upper link