M4wdriveway Yota Exo

[Harrison]

Those motors came carb'd, right? How hard would a carb/propane conversion be?

[mr.mindless]

Bring it over we can smash it up with the big bore

[etk300ex]

It's efi

[Harrison]

Right, so throw a carb on it, propane and done? Idk about ignition though

[Harrison]

Sorry, probably a useless suggestion you would have considered by now if it was viable hahaha

[M4wdFab]

ya need good ignition system. 


i could make that motor run on pane in 20 minutes if the ignition system is good...

[Ryan]

To make it carbed or propane it needs a distributor from a 22r, and I would assume some type of intake manifold as well.

[etk300ex]

Yeah it's not that easy.

[etk300ex]

I did pull plug wires, they were all firing.

[etk300ex]

I'm pretty convinced its fuel related.  I suppose I should inspect the injectors.

[mr.mindless]

put a fuel pressure gauge on the rail.

swap injectors from a happy truck if they're not a Delphi item.

what's in your ignition system? ICM, coil, distrib, plugs? I'm sure you've already done the tuneup items. Should be able to throw a generic coil in there for cheap. that'd leave the ICM which I thought was already suspect #1

[etk300ex]

all brandy new except the ICM which is a whole lot of money

fuel pressure kit from LCE has come down in price quite a bit since last year, guess its time to get it  http://www.lceperformance.com/Fuel-Pressure-Gauge-Kit-22RE-Fuel-rail-p/2019128.htm

[M4wdFab]

ductaping a mixer to the TB and unpluging the injectors will make it run fine temporarly

[M4wdFab]

might have to plug 4 dummy injectors to show good resistance on the harness

[etk300ex]

$20 to UPS ground that thing ummmmm no