M4wd&Fabrications
Projects place => Projects Section => Topic started by: rejeep on January 12, 2012, 02:58:28 PM
-
whats up with my giving tree truck?
-
is one of my friendly competitors dragging his feet :)
heeheee
-
my email get lost in the mess?? haha
On 12-Jan, 2012, at 12:58 , Michael Maskalans wrote:
> Seems to just idle rough once warmed up. IAC maybe? Brake pedal sits high
> with dead space at the top.
>
> All else seems good w it
>
> --
> Michael Maskalans
> Sent from my iPhone
-
Clutch was really agressive right off - new? or maybe just from sitting? it evened out by the time I got lunch.
there was also a couple drips on the floor by the ebrake pedal, little rain water leak somewhere.
-
is this the blue one i put a motor in or the other one with new floor boards?
-
white longbed 4x4 2.5 4sp with new floorboards
-
and stickers
-
window seals on old XJ's notorious for leaking...
might need to address that at some point after body work..
clutch was new when new motor went in 25K ago..
prob form sitting..
idle still bad?
-
once it's warm it just idles rough. Cold it purrrrrrs, and it drives fine.
may even be idle speed, or it could be mixture (O2 sensors, TPS, IAC), or dirtyness (injectors, plugs, etc - but at 25k that all should be fine)
-
sounds like bad o2 if thats the problem in closed loop.
-
the long block has 25K.. not all the acc.
-
I unplugged the O2. See if it changes anything. Wires on the O2 make it look brandy new, doesn't mean it's good or right though.
-
ill have it hooked up the machine when it goes for a sticker ::)
-
1989? I don't think so...
-
86 vintage...
older than any of you yet????
-
Older than Alex, maybe Matt and Harrison too?
-
Loose DS outside mirror
Similar vibe/rumble to Beeper at 60ish
Check engine light has to be burned out, it's not lit w no O2 sensor
Idles too slow, but I think smoother? Tough to say.
-
Interesting...
Got a scanner.. I'll figure this guy out..
I was just lift shopping.... I'm kinda excited about doing my old MJ...
Deff want to do something different..
Like exo cage, bobbed bed, so,etching different..
-
drop it off sometime ;D id love to bob one it will need tons and 37's at least though :)
-
Well in theory...
I could take the short bed and pit it on the LB right?
-
needs like 2' taken out of the short bed also....
-
Hmmm...
Where would the spring hangers go? Or are we talking coil overs?
-
personally id leave it leafs. id have to look and plan it out but the shackles would end up something like right at or just behind the tailgate.
-
And the gas tank? Might get funky under there.
You don't like body work though...
I would have to dust off the old welder...
-
i can do anything, but if it involves paint, the paint must be bedliner....
i could get it solid and straight for someone else to prep and paint easy....
-
or, just add a stripe where the bob is like eric did on the yota
-
Interesting...
Well before I pull the trigger on the old white one..
I'm getting this one up and running well and out it through its paces..
Have to analyze the rust issues, cab corners, and bed... Bit that's not an issue...
I really just miss my MJ... Can't wait to toot around in it..
-
Plugged the O2 back in at wegmans and drove home. Unplugged it in the driveway idling rough at home. Zero difference at all. I think it's just idling at 400 once it's warm. Tough to say without a tach.
Runs and drives real nice.
-
And rides better than & handles more surely than a certain around town beater of mine.
-
Yeah not o2
Couls be the MAP sensor..
-
I got a blue one for sale ;)
And as of right now.. A nice parts MJ too
-
http://www.comancheclub.com/forums/viewtopic.php?f=7&t=33238 (http://www.comancheclub.com/forums/viewtopic.php?f=7&t=33238)
I could see chopping it .... Looks sweet.
-
I need clean body and papers with shot motor not the other way around :)
I also need another project like I need another hole in the head! ;)
-
Papers... We don't need no stinking papers..
-
4x4 works!
that reminds me, I was thinking it may have a vacuum leak. the 4x4 light on the dash only turns off under lower vacuum (harder acceleration). Seems a little backwards, but details.. Silly CAD
-
I chopped mine right at the spring hangers. I tried to post pics but smf sucks balls!
-
needs a frame patch....
2 sales lost due to hole in frame...
JOB for M4wd!
-
in the blue or the 4x4?
-
blue