couple issues noted last night
we had the coils sitting on the dual rates- i was dumb and didnt notice that. Front needs 150s swapped from current 100s uppers, a wee soft but should be fine for a trip
front 60 yoke is about the same clearance as 571 to the engine sub
the 3 / 5 gages that work are not hooked up-
no tins but floors and fire walls 95% done
no tins roof or hood
wires and hoses tidy'd up
Do list:
Link nuts, adjust front pinion angle / placement / front brake line ties near coils
Fix hydro hose ties
Fire wall piece behind petals
seats need to be bolted in, harness tabs need to be welded in
shocks / bumps need to be air'd up
should at least have water temp and hook oil idiot light up
mount winch