M4wd&Fabrications
Projects place => Classifieds => Wanted => Topic started by: Wingman on February 16, 2015, 03:16:50 PM
-
Looking for a set of something 16" x 8" with 8 on 6.5" lug pattern, non-bling...
-
weld on beadlocks with the creepys?
-
Sure! Got some? :P
Creepies may be out the door this week. $$$$
-
sorry, I meant is that your plan?
I have a set, but they are my rollers. Would trade for anything 8 lug that holds air.
-
Hoping to just have good size rollers / first wheelin' set. Picked up a whooped set of 345/75/16 BFG KM2s today for cheap.
-
if your talking chevy,ford,dodge 8 lug i have 4 steelies mounted to junk tires.free to a good home
-
Text sent, Troy.
-
Stock Fords are going to either be 6" or 7" wide. From what I've read, beadlocks add about 3/4" to total width.
-
I was running my 12.50 wide ones on stock 16x7. Sourced another set of 7" wide to turn into beadlocks. They all have 16x7 or 16x6 stamped on them.
-
weld on bead locks are for the birds
get your self a 5 gal bucked of slime
-
We're not running at 25psi!
-
weld on bead locks are for the birds
Wing
seems like the right match to me!
-
We're not running at 25psi!
but you will have to start to have 4psi by the end of a 6hr wheeling day
hope OBA is in the plans for the build!
-
16x7s retrieved from Troy. Thanks!
Deposit for Creepies received.
-
What are you getting to replace the creepies? Not many options for a 16" wheel...
-
Picked up a whooped set of 345/75/16 BFG KM2s today for cheap.
-
Ah
-
Creepies sold. Beadlock order pending.
-
(https://totalmetalinnovations.com/bmz_cache/5/505f3427f9605fb1faf08b79bfa7b76f.image.250x234.png)