Vendors Place > Aussie Locker

Possible first ever Aussie locker issue

(1/2) > >>

GBR928:
I have an issue with my Aussie locker in the d30. When making 3 point turns, parallel parking, etc it feels like the locker is binding up and then makes a loud cracking noise. Was wondering if anyone experienced anything like this before I go pulling apart the front end.

M4wdFab:
probably a worn cross pin, out of spec on the small side or one or more of your pins are broken

GBR928:
Ok sounds like i need to pull it apart. You can delete this thread now.

M4wdFab:
not the lockers fault.  most of the problems i get from these complaints are worn parts around the lockers.

rejeep:
the locker is stronger than the OE parts..

Navigation

[0] Message Index

[#] Next page