rcvs were 50% queiter, and in a few trail hours i noticed most of the grease was pushed out and the sound the same now.
found a huge fail on my part tonight. when i changed out the hub to one of the ones i got from chris, i didnt notice he took the outer bearing snap ring out to swap to his new hubs. outer bearing race slipped in 1/2" and no preload on the hub bearins. caused seal to leak. i almost left it. shaft and rotor only holding wheel true. shurly soon to failure.
found snap ring in old cut up hub in scrap pile, new seal, cleaned and assembled.
found a lot of link bolts loose tonight.
attempted to seal MC cover
lube job.
Have two tires to break down, mount 2 treps this week, fluid check, tool bag check, fuel.
plan to load Tuesday or Wednesday.