« previous next »
Pages: [1]   Go Down

Author Topic: Brett needs hubs machened  (Read 891 times)

KingtheZJ

  • Hero Member
  • *****
  • Posts: 2204
  • Karma: +0/-0
Brett needs hubs machened
« on: June 27, 2013, 08:52:15 AM »
ford D60 hubs tuned down a little to fit dodge wheels


who in rochester could do this? recommendations?

this is what i came up with:
http://www.yellowpages.com/rochester-ny/machine-shops
Report to moderator   Logged

rangerover

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: Brett needs hubs machened
« Reply #1 on: June 27, 2013, 08:56:31 AM »
Engine Assembly may be able to do this. They're right off university @ winton

 47 Halstead St, Rochester, NY ‎
(585) 288-6990
Report to moderator   Logged

matt

  • Hero Member
  • *****
  • Posts: 608
  • Karma: +0/-0
Re: Brett needs hubs machened
« Reply #2 on: June 27, 2013, 12:01:14 PM »
How much material you need off?
Report to moderator   Logged

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15397
  • Karma: +2/-16
Brett needs hubs machened
« Reply #3 on: June 27, 2013, 12:08:23 PM »
Grinder in a vice spindle clamped to the bench hub with the rotor and studs out. Fresh grinding stone for a good square edge. That's how I turned my ford hubs down to 4.77"


Tapatalking in traffic
Report to moderator   Logged
Quote from: etk300ex
oh lord!

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22514
  • Karma: +11/-22
Re: Brett needs hubs machened
« Reply #4 on: June 27, 2013, 12:18:22 PM »
i have perfected the ID boring of carrier bearings for two piece shafts with my right angle die grinder.  was sweet machine work
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »