M4wd&Fabrications
Projects place => Projects Section => Topic started by: M4wdFab on March 22, 2019, 09:14:12 PM
-
unknown year
7400lb machine
4K lift
looks like it has the 225 slant chrysler gas motor.
after a few cranks start munched it self but it appears to be in mostly working condition.
probably end up converting to LPG since i have the parts.
starter motor cross info
Prestolite MDU6019 46-12846-2427MDT6012MDT6012C MDT6012BT
Hyster 3003786
Yale 2200521-055099304-00 599904-00
Wilson 91-06-1906 91-06-1865
Chrysler 1941118
Onan 191-1209
-
Good numbers.
Can’t check Midwest inventory from home.. nada in Buf or Syr.
-
im gona not be impatient and not order one from amazon to be here Wednesday. If i can walk into the electrical /starter place at on Emerson st and get a 5-20$ part to fix my starter since its in great shape other than broke gear, ill try that. if not i bet they stock one. wont make a second trip.
thought i was going to be slick and use some parts from the 48 chevy chassis, but it just wasnt going to work right and risk more flywheel damage.
gathered my propane bits, i have enough to run it short term on a grill tank. but need some fittings to go back to an actual liquid fork tank (which i sold my last one to wolfi not too long ago ha)
-
ended up just ordering a new starter.
added a gravity tank (1gal surge tank from Ford cooling system) and filter.
shop lot donuts and picking things up complete!
-
!!!!!!Awesome!!!!!!
-
still dont quite understand clutch. 95% of travel doesnt do anything, and then its almost like its a hydralic valve not a mechanical clutch. I havent pulled the floor tin to inspect whats going in in the transmission area.
plan to pull and eval fluids. so far coolant looked green and ok, engine oil was present. trans looks like milky atf, cant find where to check either hydro systems. i think steering is separate from lift / tilt.
needs a battery hold down and one of the side pannels is missing.
needs a light bar and probably a bigger fuel tank.
-
i remember the clutch being wonky...
we used it to pack up the store and I hit the back of the trailer a few times..
much easier with a skid of rotors
-
is it a clutch like a jeep? or somethign weird and hydro?
first job tomorrow, i will enjoy not loading a 14 bolt by hand. haha
-
apparently the locals on FB thing this thing is too loud and has a roaring engine at all hours of the night.
used for 5 minutes to lift an oil tote from brets truck.
morons. just morons.
-
I saw it on the highlights and just laughed
-
I left that group. Couldn’t stand the raw unfiltered humanity. Final straw was some busybody minding neighbor’s visitors coming and going all night. I suggested minding her own business.
-
lol, its a good read, my fav is when some lady says to tell the landlord on you
-
what a joke. screw those people. im done caring.
-
did work today. 90% of shop moved.
had to have been 30k gross felt HEAVY
-
love it.....
-
this thing has sat under my barn really since i moved here 3 years ago.
threw a fresh battery and had to change a leaking fuel shut off, fired right up and drove it up stairs. not really sure why i was scared to put it up stairs on the wood floor, but i guess its fine lol
listed for sale or ill keep it up here now. could use a carb rebuild, and maybe investigate the original fuel tank / fuel pump situation.
-
the price you mentioned you'd list it for on marketplace is way too cheap IMO if it's running good.
Should list at 2.5-3k. Or maybe its just my area. My area is growing warehouses like crazy due to the savannah port and functional forklifts are being snatched up left and right.
-
i listed it for 2500 after cora mentioned that too.
lots of broken piles listed for 1800 around here, i guess i was off on its value. i was thinking more like its worth 800 in scrap and the rest is bonus.
but it is a leak free fully functional machine i supose.
-
couple solid messages on this from people i actually know plus a few randos so it will probably move quick i guess.
-
Did I just see this thing being delivered on Erik's fb story?
-
Erik and Cora just got an electric unit last week. Not this one.
-
lol no i still have it. dont think this machine would fit in with the new building lol
-
deposit taken and loaded. headed to buffalo tomorrow to a small fence and block company warehouse. got full asking plus delivery. farewell good friend.