spent some more time today with the YJ under the knife... or cut off wheel....
Front section of the sliders cut nice... flush with the body tub...
T square and some blue tape made for easy work..
went to go mock up the rears and there was a bit of an issue...
the rear portion of the AtoZ sliders extend way beyond where the TnT corners mount.
A few marks with a tire pencil and some surgical cutting with the grinder and I had a rough outline.
a few trail and error fitments and I finally had it snugged up where it needs to be..
and yes.. nicked the body in a few places, but nothing more than a scratch... little seam sealer and POR and good as new..
In hindsight im glad i didnt take the sliders off. These actually are a fit as you go kind of product..
assuming I didnt have the AtoZ sliders and perhaps the TnT brand or none it would have been an easier job..
Passenger side is all done.. Ready to drill the holes for the mounting hardware and drop off for paint next week.
Still have to work on the driver side... Monday perhaps..
I had to remove the tailgate for this which might add another step to the process of getting the Jeep back together..
Something I've been meaning to do for a while, but havent pulled the trigger...