Car has a new owner
Did some shakedown yesterday. Aside from finding a missing zip tie by blowing the neg post off the battery, all seems well.
It needs some adjustments for me. I'm going to try raising the rear of the driver seat mounts an inch or so. That may make the wheel OK, along with improving visibility. I have at least 8" of headroom now. The steering wheel may still need to come down some but it's an easy change.
Near term adjustments will be made to harnesses, all three shifters (the interlock pills are completely removed from that case, aren't they? It was grinding in front low like the rear wasn't all the way out.), and limit straps will be added. Rear lights will be adjusted for race rules. I'd like to put an emergency use grand master kill on the ground side of the battery that EVERYTHING goes through. Needs extinguishers.
Low Clearance signage will be added inside my trailer
mid term plans include improving wiring, replacing switches, moving the orbital to the far side of the firewall with a longer and maybe adjustable column, changing brake pedal ratio or adding a booster (plenty of brakes... with 400+# of pedal effort), and deciding on a next tire, I think KRTs aren't for me and aren't for the wet east. Fan control will be changed, using a controller I already have. High always is too noisy for rec wheeling.
Thought I hit post on this 4.5 hours ago. I guess I lost the window...
Looks like 4 good tech inspection failures right now. Belts and neutral saftey aren't happening by Friday.
Grand master kill switch that's going to go ~3" away from the battery. I'll bypass it with something fused at 5-10a if I need to for a race tracker or something like that, but I want to be able to SHUT IT ALL OFF after twice not burning it up.
http://www.waytekwire.com/item/44057/MASTER-BATTERY-DISCONNECT/And I think this will be the shifter, with shift plate mods.
http://www.summitracing.com/parts/bmm-81041Edit to add parts:
Belt with 130a alt and goatbuilt brackets and undersized p pump pulley: 80â€
Lower front rad hose: 21997
rear swaybar is 1.25" 37 1/2" length Schroeder bar. 39 spline, matches 572 and 928.
Brian from ADS suggests 200-225psi fully extended for racing. Can go down to 150psi at ride height for trail riding