Facebook Market place good finds

[M4wdFab]

thats nice

[mr.mindless]

Big’un!

[mr.mindless]

I've been getting waste oil from this guy for a while (not much, couple barrels per year), saw this setup in person the other day when picking up the used oil that had been in it. pretty neat if anyone is looking to dispense exactly two kinds of oil in bulk. He really wants it out of his way, any reasonable offer would take it.
https://www.facebook.com/marketplace/item/136116366073553/

[M4wdFab]

have never seen something like this for small outboards, thats neat.

https://www.facebook.com/marketplace/item/1192963994725210/

10hrs seems suspect on a green tank.  my 105hp 258 jeep would run about 90 seconds at 1/3 throttle i remember lol

quick math
2.5hp about 1860watts

propane
27kw/h / gallon
16oz green tank might be around via google is .23gal so 6.21kw/h

ya thats more like 3 hours ignoring efficiency and a lot of assumptions if my math skills are still somewhat on par

[M]

have never seen something like this for small outboards, thats neat.

https://www.facebook.com/marketplace/item/1192963994725210/

10hrs seems suspect on a green tank.  my 105hp 258 jeep would run about 90 seconds at 1/3 throttle i remember lol

quick math
2.5hp about 1860watts

propane
27kw/h / gallon
16oz green tank might be around via google is .23gal so 6.21kw/h

ya thats more like 3 hours ignoring efficiency and a lot of assumptions if my math skills are still somewhat on par

https://marineenginedepot.com/lehr-25-horsepower-propane-powered-outboard-engine-lp25s-short-shaft-15

Running Time: Throttle @ 5000rpm: approx. one hour; Throttle @ 3000rpm: approx. 2 1/2 hours

edit:  manual says motor has max RPM of 3,000 so the above statement is incorrect.  Manual here:  http://golehr.com/downloads/LEHR_2_5_Operators_Manual.pdf

Fascinating motor. Never heard of it and it's been out 10+ years.

[M4wdFab]

Fascinating motor. Never heard of it and it's been out 10+ years.

thats what i was thinking! lol

[mr.mindless]

Ditto!

[KingtheZJ]

Looking for a pallet jack if anyone has one to sell or sees something around.

[mr.mindless]

I ended up buying one new last fall, I couldn't find one close and reasonable $ when I needed it.

I need one once a year to move pellets around in the house garage. I could probably make use of one in the shop once in a while, but never bothered to move it over this year... so we could probably "come to an arrangement" with my frequency of need

[M4wdFab]

pallet jack 65$

https://www.facebook.com/marketplace/item/161933863197429/

[M4wdFab]

2.5" spindle bore, man if this was 3 or 3.5 id own it! 

still great deal for nice big machine!

https://www.facebook.com/marketplace/item/284830840544104/

[M4wdFab]

ooooo chevy bucket van LS 1500$!

https://www.facebook.com/marketplace/item/213260201490701/ 

[M4wdFab]

scored some boxes cheap down in PA

just ordered keys for 10$ for them, hope the lock code works!

[etk300ex]

nice!

[mr.mindless]

If those hinges haven't rusted solid those look like a good score!