The Profender 4-seater

[Ryan]

The one bolt that is thru the floor on the front side you cant get a cutoff wheel or sawzall to. The other 3 are fine. No need to pull anything to get to them all. I can tighten them with a wrench from under the pile.

it needs "give" both ways, otherwise it may as well be bolted in solid.

Why would solid mounted be bad for a divorce mount t-case? There is no need for "give" on a divorced mount.

[Nick]

It is a give and take relationship

[Ryan]

Raining tonight, so no fence work. Putting the front end of this pile back together tonight.

[Ryan]

3 leaky beadlocks, from te inside of the wheel. Im going to try and slime them to see if that cure the leaks.

[mr.mindless]

If its at the bead I'll be surprised if it works.

[Ryan]

Its leaky welds from the backside of the weld on ring (I did not weld them), not the actual tire bead.

[mr.mindless]

Ah, misunderstood. No clue if that'll work. Would be neat.

[M4wdFab]

DIY with cracked welds after 40 race miles, hmmm. interesting.

[Ryan]

If slime can seal up Smikes holy TSLs then I think it can do just about anything. Hahahahah

[Ryan]

DIY with cracked welds after 40 race miles, hmmm. interesting.

I will be surprised if they are still on this rig next season.

[M4wdFab]

i moved those TSL yesterday, and every one of them was still hard with air!

[dubt]

sweet

[GBR928]

i moved those TSL yesterday, and every one of them was still hard with air!

Don't let the air out of them without ventilation in the shop. You may asphyxiate yourself!

[M4wdFab]

i filled my enclosed trailer with tires sunday.  like filled, tires, blown motor, boxes and parts, and moved to storage under the apt



i just counted, i am up to 48 tires i currently own, i am sure there are more bah!

[rejeep]

need to dump them?  i know a place