Concern: How To Program a New Remote
Cause: -
Resolution: Up to 4 remotes can be programmed into receiver at any given time. 1) Locate the receiver...look for a black half-sphere on the rear portion of the overhead console. 2) Sit in driver seat and close door. All doors should be closed. 3) Open driver's door. Leave it open through the programming procedure. 4) Slide mechanical door lock lever to the LOCK position. DO NOT use the switch. 5) Insert ignition key and turn it to RUN position. DO NOT start the engine. Within 20 seconds, aim a remote at receiver dome and press and hold lock button until the power locks cycle. (When receiver accepts programming code the driver's door will unlock.) 6) Once the first remote has been programmed, additional remotes (up to 4) may be programmed into receiver. Within 20 seconds of the previous remote programming, move the mechanical door lock lever to LOCK position. Aim another remote at receiver dome and press LOCK button for at least 5 seconds. The door lock will cycle again. 7) To lock the programmed codes into the receiver, the ignition must be turned off and back on within 20 seconds after programming the last remote's code. At that time, all previous codes are erased from the module.
