M4wd&Fabrications
Projects place => Tech => Topic started by: JEEPWERX on February 26, 2015, 01:54:38 PM
-
Lifetime channel
151.9700
Tone code
162.2
Mike can you post this info somewhere for future reference.
-
(http://tapatalk.imageshack.com/v2/15/02/26/e7d91d8b4ad481de6ab6b4a092cbdea6.jpg)
-
great info erik! i didnt know we could program our radios. thank you!
-
Cost for speaker modification is 15.00
http://www.ruggedradios.com/index.php?main_page=product_info&products_id=1610 (http://www.ruggedradios.com/index.php?main_page=product_info&products_id=1610)
-
Good tech write up.
http://www.pirate4x4.com/tech/billavista/Comms/ (http://www.pirate4x4.com/tech/billavista/Comms/)
-
FYI
KOH1 / KOH2 are police ban loud and clear at AOAA.....
we had to change from lifetime channel because my handheld isnt programmed yet, and i forgot my hand mic for the main radio again.
-
Lmao
Did u get yelled at?
Sent from my SM-N910V using Tapatalk
-
no, but im sure we would have if we continued to use it
Matts radio is locked out and wont find the regular FRS channels like i could on mine.
-
Strange.
He may have not received the same programming as the others.
Sent from my SM-N910V using Tapatalk
-
Rigged hooked us up with a intercom/radio for the Teryx. Should have them this week to install.
-
are we ctcs or dcs?
you set the tone code for recieve and transmit i assume?
-
I can't remember without looking at the cheat sheet.
They do have a bunch of videos also.
Sent from my SM-N910V using Tapatalk
-
no idea, could check my radio programming when we're down there.
-
Dont be afraid to call. They are great about support.
Sent from my SM-N910V using Tapatalk
-
we traced Matts issues to a problem with the intercom. driver channel does not transmit to anything other than its own helmet speakers. co driver fully functions as it should. all cables swapped and knobs fully adjusted no go other than issue staying with driver side of the intercom.
-
They will have someone in Kentucky. Dident help for this weekend....
-
Cora/Erik, if you have your channel info can you share it so I can add to the first post here?
-
Anyone get the frequency and tone codes if needed?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
-
torq was pretty noisy and seemed to get walked on pretty hard when we were prerunning.
i think Matt should get his own channel also for multi race entrants.
-
Need multi-watch or many radios at the pits if we all start running different channels.
Could help in-car though. I can imagine when one is talking to the pits it could get annoying for other racecars.
Torq is on a bad frequency there - in use by a ski resort within range.
Tapatalking in traffic
-
I was reminded this weekend that LIFETIME was removed from my vx2200 in car radio at KOH this year when TORQ was added.
Awesome.
I'm over my anger of the moment, and I just ordered programming cables for both the handheld radios and the Vertex 50w radios. Should be here in 2 weeks or so after the slow boat from China. I'll be getting one of my junker laptops set up to program radios along with reading OBD codes and I'll probably just leave it in the trailer, then we can all get synced up and make adjustments in the field if needed.
TORQ is a bad channel at Line Mountain too, I heard what I think was race ops traffic on it. It's known that KOH1 is a police channel there as well. I used SANDLIMO there without issue Saturday, that could be a good backup for us.
-
Torq 151.955 no tone
Lifetime was still on my 50w, just buried in the 4th tier of channels where I didnt find it.
Trying to figure out how to edit this channel list...
Tapatalking in traffic
-
thought we were 69
-
69 & 70 on all my handhelds now if that's what you mean?
-
ya, that sounds right- because we are the first 2 additional channels added to all of our radios to the standard rugged race program addons
-
I had different settings on one of my 3 and it was missing a bunch of channels. now they all match.
I also adjusted the banks on my car radio and put I think KOH1 KOH2 weatherman torq and lifetime in bank 4. not many to look through. button 3 cycles through the channel banks. lifetime was still on my radio, just off in the 4th bank and all alone, I didn't know the radio well enough to find it.
shit is super easy now that I know how to do it.
-
Awesome Mike.
Sent from my SM-N910V using Tapatalk
-
awesome!
-
List of channels
-
Mike - are you programing radios now? Alex is bringing his up and will need some assistance, if you can help.
Thanks!!
-
can do!
currently looking like I'll be over thursday or friday, I'll keep you posted.
-
Anyone get deals on two helmet mic/speaker kits and a Bluetooth module for 660?
Sent from my XT1254 using Tapatalk
-
check their sale stuff, may help?
http://www.ruggedradios.com/index.php?main_page=page&id=259
10% off any time with "pirate10"
if you know exactly what you need, big savings buying white label stuff direct on amazon or ebay than going through rugged, but the ease of selection is worth quite a bit sometimes.
-
Thanks. Scored a mount too for $20.
Sent from my XT1254 using Tapatalk
-
We have no use for dual band radios, right? We don't use any UHF frequencies?
-
yeah we're all using VHF only.
I'll be looking for another heavy set to mount in the truck. Probably one set that I'll migrate between cab and box for road and pit use.