Rear Dakota shaft fits the front of 571. Flex tested, larger tube size clears lower link by about 1/4" at right full stuff.
Need to turn down the register on the flange: diameter mismatch.
All parts pulled.
Existing shaft ready for a fresh slip too. CV is perfect.
Pulled the carrier bearing for preventative replacement too. I think it'll get the steel over strap treatment in case of failure if the bolt holes are agreeable and I can get the other set of bolts out to put in longer units to support that. May be a challenge.
Any off the shelf local replacement y'all can think of, or am I going to be overnighting a bearing to make the picnic?
Sent from my iPhone using Tapatalk