Productive weekend! First, took the t-case skid plate and cross member off, used the grinder and got all the black coating off the unibody rails, and got the stiffeners welded in. Cut out end caps and welded them to the box tube ends, then ground them smooth. I finally got to weld for the first time, I was super excited
Cut out the old rockers and Harry and I fit the new ones in and he tacked them all. There's a spot we had to cut out that was crushed and rusty so we'll have to fill it in later. After I left Harry's tonight, he welded more of the rocker panels, until he ran out of oxygen. While I'm at work this week he'll prime the stiffeners and I got some flat metallic charcoal spray paint for the rocker panels to match the flares and door panels. Next up... lockers