« previous next »
Pages: 1 ... 27 28 [29] 30 31 ... 79   Go Down

Author Topic: 571  (Read 95377 times)

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #420 on: January 05, 2015, 12:34:30 PM »
interesting, never heard of them

how did the upper king pin bushings look? 

i had to replace the king pin eliminator plates in mine, the adjustor bolt wore a hole through them, the nylon cones were shattered as they are every time the knuckle comes out...


I put reid bronz$e units in this time. 
Report to moderator   Logged

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #421 on: January 05, 2015, 12:36:57 PM »
seriou$ly on the broze units. one bushing was in two pieces, the other was whole. MUCH better condition than expected. Both very worn on the lower outer. will replace with stock this and probably next go-around. I think the 37s vs the 44s have a huge impact in parts wear on the frontend. I'm uncertain what Matt's excuse is ;)
Report to moderator   Logged
Quote from: etk300ex
oh lord!

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #422 on: January 05, 2015, 12:45:49 PM »
the springs keep the nylons happy and tight even broken.


the Artec arms will need adjustment almost every trip / race to keep them tight. 


i have at least one johnny joint thats usable for you untill alumminummmmm and heims
Report to moderator   Logged

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #423 on: January 05, 2015, 12:59:39 PM »
JJs on rear axle uppers should be OK. all is welded together there from bad threads at some point so heim swap will definitely wait for new arms.

Already have blown bushings on front frame side uppers, bah.

they'll be shot the first day there I'm sure. May change them mid week if the front pisses me off ::)

Report to moderator   Logged
Quote from: etk300ex
oh lord!

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #424 on: January 08, 2015, 10:34:33 AM »
gears and spools and cell foam ordered from Summit. really wish this week hadn't been kicking my ass and I'd have been able to push that button yesterday and maybe have them Friday.
Oh well, plenty of other shit to do this weekend.
uugh, I need a crew. and a vacation.
Report to moderator   Logged
Quote from: etk300ex
oh lord!

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #425 on: January 08, 2015, 10:35:12 AM »
Planning to do proper fuel pickup system and cell foam for next season. not touching the cell now.
Report to moderator   Logged
Quote from: etk300ex
oh lord!

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #426 on: January 08, 2015, 11:10:53 AM »
nice!

one of us should order a D60 pinion depth gage one of these days lol
Report to moderator   Logged

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #427 on: January 11, 2015, 10:13:35 PM »
I really wish I had a plasma. Winch mount would be done along with something else if I did, instead of winch almost done.


Tapatalking in traffic
Report to moderator   Logged
Quote from: etk300ex
oh lord!

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #428 on: January 11, 2015, 11:01:19 PM »
there is one 10 min down the road.... open any time
Report to moderator   Logged

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #429 on: January 13, 2015, 12:47:12 AM »
get your arms yet?

let me know if you need quality hole drilling devices

928 and 572 run 7/8 bolts single shear at the arm, and 3/4 at the PSC clevis


i had to buy fine thread bolts a different size for the 2 on each side that go into the key way, not sure why, but let me know i have a bag of them if needed.

HD cone washers should be made also- i have the right DOM some spin some on the lathe
Report to moderator   Logged

Ryan

  • M4wd Vendor
  • Hero Member
  • *****
  • Posts: 3803
  • Karma: +3/-3
  • Superstar
    • Lifetime LED
Re: 571
« Reply #430 on: January 13, 2015, 08:30:04 AM »
Artec order still in "Processing"
Report to moderator   Logged

mr.mindless

  • Administrator
  • Hero Member
  • *****
  • Posts: 15383
  • Karma: +2/-16
Re: 571
« Reply #431 on: January 13, 2015, 08:49:00 AM »
Wtf.

I read of needing different hardware through the keyways. Thanks.

Taking today off to burn a bunch of extra propane and get some work done on this thing.


Tapatalking in traffic
Report to moderator   Logged
Quote from: etk300ex
oh lord!

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #432 on: January 13, 2015, 09:38:25 AM »
pick up a phone now and call.  those guy are busy this time of year.  make sure they have them in stock and they can be shipped.....
Report to moderator   Logged

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #433 on: January 13, 2015, 11:42:26 AM »
Report to moderator   Logged

M4wdFab

  • Administrator
  • Hero Member
  • *****
  • Posts: 22497
  • Karma: +11/-22
Re: 571
« Reply #434 on: January 13, 2015, 11:43:41 AM »
pay him 50 to drop it at 105 poison spider
Report to moderator   Logged
Pages: 1 ... 27 28 [29] 30 31 ... 79   Go Up
« previous next »